According to the shop book the terminal on the left is the sending unit The right side is the positive.
That is the same tool we use on WWII airplanes. It works great.
good luck and best wishes
a 1953 power glide 235 has two bolt rocker cover. check the lifter cover most 216 cover goes around the spark plugs
Hi, I live near Stockton Wheel . They do excellent work, They straightened my wheels and repaired the hub cap clips and powder coated all 5...
I like the left one. The closer one. Gary
Do you have a good floor transmission cover
Mine was the same color as the body too. Factory color.
If the holes are about an half inch or smaller you can use a piece of fiber glass and por15. It works really well. its not cheap. About a 120 a...
Hi Danny, I had a truck that did what yours is doing. My problem was the coil quit working when in got hot and when it cooled off it would start...
Looks good, looking forward watching your posts. Keep up the good work.
Hi, I am looking for a set of stock horns, also a pedal set and clutch linkage.
It definitely needs a resistor the gas gauge will burn up with 12v
hood Here is another site http://www.cs.siena.edu/~lederman/truck/Documents/HoodAlignment/AD_hood_alignment.htm
brake pedals We don't have the pedals we are putting them back in the truck to put it back to manual trans.
Thank you Ol'Chebby
Does any one have a set of stock horns the they wold like to part with. Also need a clutch and brake pedal assembly.
hood They are right there is a lot to do. It is best to get a manual . You have to remove the hood latch put a 4inch block there . Then you have...
fron end Is your front end still I beam? If so you shim it to change the caster.
The rear ends I have done none have bolted right in. I have had to make perches and weld the on, and you will have do change the tranny yo an open...
Separate names with a comma.
