Thankd for the info!!
Hey everybody! I have a question about my rear glass. I have a regular cab 78 C10 and I can pick up a slider for it pretty cheap from craigslist...
Thanks for the Help I'll try it as soon as I get home! Thanks again!:cool:
Hey everybody, Need a little help here. I bought a new ignition switch/cylinder for my 78 chevy 1/2 ton and I can get it in OK. The problem is...
Hey everybody! Quick question, my fuel gauge is working but when I fill the tank it marks WAY past full and when it's empty it shows about 1/4...
column swap What year did the column come out of? 73 to 87 should be a straight swap except for the wiper controls. Make sure if you have a truck...
Try craigslist, I ve had a lot of luck finding parts for my truck on there. Good luck
Thanks for the input. I also thought that the column that was in there was not the original. The hazard light switch was broken off but I found it...
OK so it is cruise control. Now I've run into another problem, my original column is splined where the steering shaft coupling is. The one I...
No, the column only has a tilt no cruise or wiper controls on the column at all. Could this go to the tranny? I have the stock TH350 in mine but...
I bought this column off of craigslist it's from an 84 chevy, wires and connectors match up great but I don't know what this one single wire on...
That's a much better idea than I had. I was thinking about mounting on the frane before. I've seen that link before plus a few others....
Maybe, but pulling off the front clip kind of goes along with my next project anyway, which is doing a front end tilt. I need to figure where I...
Good call on the taking my time thing. I plan on doing that. There was a guy in the local news that was pulling the motor and tranny from his...
Thanks for the tip guys, I think I'll probably remove the whole front clip. If I stand in my driveway and crack open a beer that sound will...
I was hoping to install my motor and tranny as one unit but I cannot raise my cherry picker high enough to clear the front end. I am inside my...
Cleaning Thanks for all the great tips! I was told by a local rebuilder that if I took a thin chisel and slowly worked it between the manifold...
Blazer top Try this craigslist link, there's one in Forney if he's still got it http://dallas.craigslist.org/dal/car/761235807.html Good luck!!
Thanks for the tips. The valve covers are chrome but the are really oily and dirty. I don,t have any rust though. The rest of the stuff, pulleys,...
Any suggestions on cleaning valve covers, intake manifold and such for reinstallation and painting? Thanks in advance!!
Separate names with a comma.
