Most I seen that have factory paint do not have any paint behind them but the washers stricker might be painted (over spray) or not. I think there...
Ok then as last post said, another place to check is the back side of the door switch smake sure that the switch grounding out on the back side...
I pretty sure Don has nailed on the head.;)
As said GonicGM about the headlight that true most people that are not use to the older head light switches. But if you know that about the switch...
What motor set up is the 85 up in Canada all most all seem to have it on the right three 84 one was a straight 6, two where 305's none had A/c But...
All most all mount on the right side inner fender unless you have a deisl. you need the two long stud smaal u shape brace . [ATTACH] this the...
I you have duel pumps and it does not make any noise check the conection at the pump good clean contacts and grounds. if all is good then the pump...
As said by the first post leaking wheel cylinder or leaky lines caliper valve at the front, if all is ok. Then I would try bleeding brakes a few...
Does your head lights on high work if you unplug it . Have you test the head light to see if the high beams are not burned out. Check the head...
Well I would check + side to the sending unit or the + side from the gauge to the tank. Unless your gauge got a power spike and is no good....
Sound like the OD lock up or the trans pc module problem.
Good luck with the new truck sorry you had to give up old blue :)
700R4 trans,is a Over drive Trans it will bolt right in you will have to move the trans cross frame back a few holes. set up the TV cable so it...
Totaly agree with both others.:cool::cool::cool::cool:
looking good!!:):):eek::eek::D
Well call edelbrock toll free line. or go to there on line help. I do not like those carb's I would rather have the stock carb or a Holley . :D...
There is a differents from a upper none Tilt column and a Tilt column case and upper guts but the rods should be the same.
I hope this is what you asking, three bolts are 9/16" one on the top front of the Alt is 1/2"
Is the motor stock in that. Have you updated the rad is 3lb cap the highest you can go. Maybe a 8 to 10 if the rad and motor will handle it....
Sound like you talking about the hot air choke that can make noise if it starting get loose or wore out. that helps to warm up the choke turn the...
Separate names with a comma.
