keep the rear gears for the new six build up ,overdrive is the way to go- check out inliners international for building up a six cyl
don't you have to cut and weld pieces of sheet metal on door edge to install bearclaws or is it easier on these models?
RE: Tool to take out tailight housi are you sure it's not a sq. drive these can be found at home depot or good hardware store - if the edges are...
Chevy duty does carry a replacement wheel or you can try alternating heat and penetrating oil on the shaft, but be carefull the oil will flare up...
most all parts are not a bolt in, all are massaged by the installer. use a two part epoxy primer on all surfaces and try to make friends w/ a...
Sounds like the fuel isn't totally vaporizing and starting to foul out the plugs, check for black plugs.
It could be just running to rich -is choke slowly opening up as it should? If you have a heat riser valve on exhaust manifold this closes one...
RE: Exhaust :7 Where did you find headers for a V6 or are they customs too?
:o Anybody know of a source for original or close to original fabric for the "custom cab" The vinyl is easy to find but not the fabric part.
Tank relocation :7 Thanks for info on tank I've been wondering how to move it. Is that the way the tail pipe is supposed to route around the...
Yea, I belong to that group too, but they seem to want to keep their trucks heavy duty- but they do have alot of good advice.
:+ I have a 64 GMC that I just got- not bad for the age, came out of farm country with 79,000 miles has the 305v6, air and a transplanted cruise...
Separate names with a comma.
