My understanding is that the brakes on the 3/4 are the same as the 1/2 ton. My assumption is your 47 is a 2nd not a 1st.
I have a pre-owned jockstrap I'll let go for $1,000.00 or trade for this rust bucket.
25 thousand wouldn't be near enough for professional work, it wouldn't even cover DIY. Well done work, just missing a big block.:D
Newer cooling systems were designed to work more efficiently under more pressure. The old AD is not effected by pressure.
I bought a roll but I think I am going to use some leftover "Second Skin" vib dampener instead. Only a little piece will help reduce noise from...
[IMG][/URL][/IMG] If you are not too anal about originality and want your engine area a little neater than it came with, I bought this PVC from...
Robert: Here is a picture of how I did it with my 3600. [IMG]
Sway bars make a bunch of difference and a great improvement to the ride but one of the most important safety improvements on these old trucks is...
This is what I got: http://www.classicperform.com/Store/1947_59_Trucks/CP169.htm
I will be starting my interior soon. I have already covered it all with Second Skin vibration dampener and need to lay some carpet. What is the...
Richie: Great looking garage! Did you put the truck in there for the photo shoot or does you wife really let you use it?:D
Keep the holes and install a mirror. We never have enough mirrors on these old AD trucks. Back then all roads were only two lane. Today with...
I will be ordering my column soon and need to get some "expert" help on the install. I think I know how to measure for the column length but how...
I wouldn't use the 55 rear. Instead I would use a late 70s early 80s Camaro/Trans Am 10 bolt. With that the 2002 Camaro/Trans Am 12 inch disc...
Have you measured the replacement rear to make sure you have room under there? If it fits you will probably need to cut off the spring perches...
The front end of the 3/4 is the same as the 1/2 ton as far as width is concerned. Just make the swap. The rear frames are a bunch different.
Shakespeare said, "he who hesitates is lost". For me and my oil pressure sending unit nothing could be more true. Had I bought one and installed...
I am using split loom to cover the wires. I just wanted something to cover them as they come through the hole. This is what I have in mind....
"I just moved the harness down to behind the inner fender, then ran my wires under the fender to remain hidden." I thought about that except my...
I am wiring my 1951 Chevy 3/4 ton and need to know if anyone sells some kind of device that covers the wires coming out of the 1" hole in the...
Separate names with a comma.
