RE: Rear and Qtr window interior tr I don't see any on my '49 1 1/2 ton 4408. Do you have the glass installed? Is it possible the holes are...
RE: 16 [updated:LAST EDITED ON May-08-06 AT 03:28 PM (CST)]Nate, I sure hope they aren't going to operate on that brain of yours. We...
Now that is nice. I only hope my '49 4408 turns out that well. Great job. What color blue is that? Is there a special name for it?
I finally had a major breakthrough with my '49 4408 today. Even though it is missing most of the electrics and the front fenders, I drove it down...
You might give Obsolete Chevrolet Parts a call. They have all sorts of used stuff that they have scrapped off old trucks that's not in the...
HUMMM! That's one I didn't think of. I will take a look. I did put a new fuel pump on a couple of months ago but that doesn't mean it might not be...
I drained the oil on my 235 a couple of weeks ago because it was showing way over full on the dipstick. What came out was gray colored and smelled...
RE: Vac. Advance Tube Like Nate said, either works fine. Mine was originally set up with the steel line that routes with the gas line to the...
RE: Distributor - Embarrassed to As I, too, have the vacuum advance on mine. Like the other say, loosen the collar clamp just enough to have some...
RE: Enging Quits I'm an electronics specialist and Field Applicaitions Engineer so test equipment for electronics is not the problem. It's more a...
RE: Adjusting Carby You always seem to help, Nate, even if it just confirms what I am already doing. I do have the plugs gapped to .035". I...
RE: Adjusting Hydraulic Lifters I did use the valve adjustment method of "remove the lash and add 1/4 turn". I also verified visually that the...
RE: Adjusting Hydraulic Lifters Thanks for the info. I am awaiting the arrival of a replacement vacuum advance that turned out to be shot. It...
Gents... I have a '62 model 235 in my '49 1 1/2 ton. It has hydraulic lifters in it. I have recently pulled the head and had it checked and have...
RE: CORRECT tire Size Thanks for the help... sort of. I think 85R16's would be quite a stretch to fit the 20" rims on a ton and a half. :D It...
One thing it could be is the throwout bearing is not being retracted all the way off the clutch fingers when the clutch is out. Try hooking the...
There are 4 studs built into the dashboard that the gauges slide onto. The large round gauge body has 4 tabs with holes that slip onto the studs...
RE:Brownie Box ! It's a twin stick. The Browny Model 41 M-1 is mounted about 4 feet behind the main box with a modified propeller shaft...
The caution about the oil pressure gauge is correct because the tube does contain oil from the engine and if left open you will get oil pumped...
RE: Final Not that I necessarily recommend it, or know where you might get one, but my 1.5 Ton 4408 has a Browny in it. That gives me an...
Separate names with a comma.
