RE: Flooding Problem Thanks, again, for the info. I got a call from Autozone this morning that Holly cancelled my order since they are...
Happy New Year, Nate. I have a small piece of the original fuel line running from the tank flex hose about 4 feet towards the fuel pump...
RE: Problem with 235...please help! Here is what I did to get my 235 (also works for 216) close enough to start without running the engine. This...
OK, I am a dunce, I guess. I am working on a 1962 model Chevy 235 in my '49 1 1/2 ton truck. I previously had problems with the ##### YF...
RE: Dirty Fuel.. Again, good tips Nate. I had already installed a fuel filter at the same time I rebuilt the carb and put on the new stainless...
RE: Which Carburetor ? Thanks Nate. I am still thinking about it. I just seem to hear a lot about the ##### leaking and the floats sticking.
Based on an experience with an airplane engine with similar symptoms years ago, check the distributor/vacuum advance system to make sure it is...
Thanks for the words of encouragement.... I think. I have gone through it a couple of times. I confirmed that the float was set to the specified...
I am looking to replace the ##### YF 2100S on my 235. This one insists on dumping gas after I rebuilt it. Evidently I did something wrong and...
Is the 2nd shifter over on the right side of the tranny about level with the tranny shifterand including a squeeze handle to release it? That's a...
RE: 235 Hard to Start - Problem Sol Thanks again, Nate, for all the advice. When I pulled the pan I was amazed at how little crud there was, so I...
RE: 235 For Sale (with shipping an Good Morning, Millerd. You are right. That is a lot of money. Like VWNate said, its a shame you aren't on the...
RE: 235 Hard to Start - Problem Sol I finally figured it out. After changing the coil and putting in the proper plugs it still was acting like it...
RE: 235 For Sale Thanks, Dave. I managed to get mine running yesterday and it doesn't sound too bad. If the shipping comes in reasonable, I would...
RE: 235 For Sale I woke up this morning and was looking closer at the 2nd photo and realized the tranny (3 speed?) and clutch housing are also...
Thanks for the great tips. I have been out working on a movie set the past few days. I just purchased a new coil for it and am going to install...
RE: 235 For Sale Sorry for the delay in responding. I have been working on a movie shoot in Scotts Mills. I am an extra in the background. It's...
RE: 235 For Sale I will probably be interested if I can't get this '62 running in my '49 1 1/2 ton flatbed. I have a posting just above about it....
I am rebuilding a 1949 Chevy 4408 1 1/2 Ton flatbed. I replaced the blown up 235 with a used 1962 235. I saw the engine start and run with no...
Separate names with a comma.
