>there is a bolt on the top of the steering box.loosen the >locknut and tighten the bolt.if then the steering is then >too tight,loosen it...
RE: trying to make the right exhaus I have 2 1/4" dual exhaust with some good flowing turbo mufflers, but I have a shorty setup (exits right...
RE: brakes arent working as well an No, it's a single master cylinder. I guess I will just throw it in the brake shop for the day and see what...
Cant the shop just replace all of the guts in the tranny and use the same case? Where are you located, I actually want to put an olds engine in...
I believe I read somewhere that the 4th prong is for the intermittant wiper control, not certain though.
Well, it's not so much that it is "too much carb" as someone indicated, but it is probably too much fuel. Cant really have too much carb as you...
Brakes are definitely not a strong area for me. I understand the basics of how they work, and when the shoes or pads need to be replaced, but...
[updated:LAST EDITED ON Mar-28-04 AT 08:48 AM (CST)]There are a few different holes in the crossmember(s) that the cable can pass through, if...
oh come on, you cant say something looks great without showing a pic! x( :7 I never thought of that, but it does sound like it would look nice.
RE: Gas tends to stop flowing quest Can you hear your fuel pump when it is operating? Does the sound seem to change? It sounds like you may not...
I am not sure that there is a standard color for the horn wire, but I am getting ready to wire up my horns and I can let you know what color the...
>I also figure I would pull the plugs and put some WD40 in the >cylinders and turn it over by hand and then drain and >replace the oil before...
Ok all of you classic rock fans, time for you to put your music where your muffler is. Or at least for me to do so ;) In Billy Joel's famous...
RE: What's the truth about exhaust [updated:LAST EDITED ON Mar-28-04 AT 08:07 AM (CST)]And for the disagreement reply... I disagree. A...
Ya, the 3-door is like the one I saw. I dont care for that look very much though because it is SO big. The truck that dvalentine posted is more...
RE: Shifting from 2nd to 1st on a T Ya, as far as I know, they are not synchromesh. You could try double-clutching and rev to match the RPM,...
RE: wanted experts on 1 ton trucks I am not an expert, but I will throw in the info I have. I have a 1965 GMC 3/4 ton truck that supposedly...
Does anyone have a pic of a 1965 Chevy or GMC truck with an extended or double-cab? I have seen ONE before, and that one looked almost like it...
Simply the fact that a 350 is not the engine that I want for the car. It does not have the powerband characteristics that I want for this light...
*bump* come on, no one has even viewed this post
Separate names with a comma.
