I did the high RPM thing on the new engine, breaking in the new camshaft. I took the a cam manufacturing guidelines, called two mechanics and...
Transmission oil filling I looked in my manual, should have from the start. It is the "bearing support retainer plug" I have been looking at. I...
Radiator I just put my radiator in. After the overhaul, the fan slightly scraped the radiator, just barely on the bottom turn. It is a 53 and I...
I have the plate off the floor board, have just put in a rebuilt transmission, and noticed a screw/bolt hole toward the rear of the transmission....
Engine breakin Thanks much, Nate. PS: Mr. Andy Forelli, DC of NY has donated to me a flywheel cover. I wanted to thank him online for being...
New motor breakin What about the additional 20 minute of run time at 1500 rpm (instead of cutting off at one minute). Does you experience see...
Engine break-in Nate - Would you go to: http://www.cranecams.com/pdf/548e.pdf and review the break-in recommendation. Would you have a...
Accelerator linkage Thank you. I had a thought on hooking up the linkage to the petal and let the other end float as I move the petal up and...
Accelerator linkage Thank you for the comments. I had it re-welded again yesterday, but it is out of align with the hole in the floor, so it...
Trying to bend my linkage rod so it would not stick, I broke the linkage rod going from the accelerator to the intermediary mechanism before the...
Engine breakin By static time engine to ball and pointer, you mean piston 1 at it highest mark, tested with a screwdriver in the spark plug hole,...
Engine Breakin So tell me again how to break in a new rebuilt motor. Use what kind of oil? I need a tachometer right? And this is not a joke...
Flywheel cover, 235 engine Thank you for the where to find info. Yes I am the one that was looking for a cheap replacement on the 235. I could...
I need a cover pan for the flywheel, clutch, throwout bearing, etc. Any suggestions on where I could locate one? Thank you. Kent
Thank you. KentC
My motor does not have an oil filter. Maybe next week, I will be getting the motor back from the machine shop. I would like to have an...
I tried Nate's suggestion on removing an old pilot bushing. You load the hole with grease then use a wooden dowl, along with a hammer to force...
235 engine Evan: Thank you for the response. I have decided to overhaul what I have, but if there is a serious engine or head problem, I might...
Engine, 250 Thank you but for the present I will pass. I am still checking around here. kentc
On this webpage, I go to the Parts-For-Sale pages and see nothing there, this is I am assuming the Task Force pages. I do not know what "bed" the...
Separate names with a comma.
