I never removed all the plugs nor open the throttle and this is what i got on mine after 800 miles after a full rebuild. [IMG]
In the last 1000 miles I have gone thru 2 mechanical fuel pumps. I'm using the Airtex 4149. What seems to be happening is for some reason the pump...
I don't think the angle of the motor would only cause #1 rockers to have way less flow than the others but out of curiosity I raised the rear of...
Engine was fully rebuilt. Only has 900 miles on it now. Psi is still around the 38ish mark. Would the oil pressure not reflect worn out mains? I...
Did my Mini HEI install a few days ago. After sorting out my carb issue I moved onto something new. Previous setup was a Pertronix system that...
even if i rev and hold the rpms up it still hardly comes out. My oil psi reading is nice and high on the gauge sitting around 35psi.
My rockers above cylinder #1 are hardly getting oil. All the other rockers have the oil bleeding nicely from the oil holes in the tops But #1 just...
so that's how you oil the distributor! all this time i have been using the grease cap of the side of the housing.
The PCV number i got was from another few guys online that have done a PCV mod. One guy drilled a hole in the top of the draft tube, another put...
Thought i would share this on this forum also. Been looking into installing a PCV system in the 235 for a while now. I just got around to it...
As for needing the residual valves........my thoughts is you actually don't unless your master cylinder is at or below the level of the brake...
I had the same issue this summer when I first got mine on the road. I also thought it was the residual valves and removed them but it made no...
[IMG] you can see the filter mount down by the power steering pump attached to the chassis.
Full flow is no benefit in my opinion. You can use almost any twist on adapter and just buy a bypass style filter. Im using a fram filter that has...
Here is a link to one of my threads on another site. I gives an overview of the truck. http://67-72chevytrucks.com/vboard/showthread.php?t=640272
I got the non latch option. At fast speeds the neg pressure in the cab will cause it to open and flap around on its own. Its kinda funny. What i...
I like the chassis job. Looks like mine did when i started back in the day. Im also running solid axle and dropped leaf springs all around. The...
I USED THIS https://www.performanceonline.com/Fuel-Tank-and-Master-Cylinder-Access-Door-Stainless-Steel-Brushed-Rectangular/
oops i misunderstood your post. My bad.............
Rear diff fills are not part of the cover. Opposite the cover near the input shaft you will find a plug generally with a square drive or allen key...
Separate names with a comma.
