Check for clogged fuel filter, if good, check for exhaust restrictions, like clogged converter.
[updated:LAST EDITED ON Mar-29-05 AT 08:04 PM (CST)]I'm only assuming that the slave cylinder mounts the same way that the six cylinder slave...
It doesnt mount to the engine, it mounts to the bellhousing on the passenger side. Hopefully the original bellhousing didnt go away with the...
[updated:LAST EDITED ON Mar-21-05 AT 06:44 PM (CST)]GMC and Chevy 1/2 ton trucks had six lug wheels with drum brakes on all four corners from...
Yes, your 235 will have a different bellhousing pattern than that of a V8 or later inline six cyl. However you can get an adapter from stovebolt...
The ignition break down sounds right, but I noticed you didnt mention anything about changing the fuel filter. You might want to check that also.
I was looking at a friends '66 C20 last night after he was complaining about the rear of his cab starting to sag. His problem seems to be in the...
RE: Question on stamp on block #Fii Larry Bear is correct as to the numbers on the pad right behind the distributor on the motor. However if you...
If you can do it reasonably, money wise, I'd go for it. I own three trucks, two half tons ('61 & '68 with six cyl. and small block respectivly)and...
RE: 1969 stright 6 to 350 conversio Shouldnt have any issue with the transmission. You'll need the correct motor "perches" however.
[updated:LAST EDITED ON Feb-04-05 AT 07:37 PM (CST)]'68-'87 boxes will bolt in. I'm pretty certain that you cannot use box from a 4x4 on two...
RE: need a 114 [updated:LAST EDITED ON Feb-01-05 AT 10:03 PM (CST)]Not certain by how much, but i know the Blazer is a shorter WB than a...
Gentlemen, go to www.autocolorlibrary.com and you can view the specific years color chips online there. Match your color, and get the code at...
RE: Thanks to 61apache and dvalenti Much obliged, I'll help where I can, but quite frankly, it's very comforting to have dval keeping an eye on...
Bob, Post the vin number here, I'm sure someone will decipher it for you.......
I cut the original shaft on the old gear box right where the instructions from REZ said too. 11/16" above the old rag joint, if I recall...
On the kick panel, driver side, there should be a tag riveted to the sheet metal there. Near the bottom of that tag, you will find a three digit...
[updated:LAST EDITED ON Jan-23-05 AT 10:32 PM (CST)]Had thought about gear vendors unit as well, but the price is too steep, compared to...
Perhaps a silly question on my part, but did you try installing new bulbs? As the bulbs age, they tend to get dimmer before they burn out...
To answer your question, most trucks of this era, with "custom cab flags" are fakes. Far more "plain jane" trucks were built in this era, than...
Separate names with a comma.
