Yes sound good. Yes the rollers rockers work better. On my 305 I put stamped steel roller tipped rockers, by cran cam's because I had them with...
Well you have spoted that it's no good. Good eye it should be ok if it pretty straight in line with each other the bend ok " As long as it not to...
You may need a few tools some bolts. just take your time and mark the wire all the parts you take off. swap them over hook up. Should take 45.min...
What wrong with your carb? If it just needs a rebuild get a kit. I really do not like other carb like "CARTER" (Edelbrock carb) I would get a...
Your using factory throttle cable, No do not cut the cable. You need to buy a bracket or make a bracket to bolt the throttle cable bracket to....
Sound good so far for the little 305, you got a little bit more cam then I do I have pretty much same Melling M55 oil pump w/ steel sleeve Cloyes...
Just in case you do not know this site does sell most of the parts your looking for. but there new and new prices :p good luck with your truck...
Check for bad ground first on the top of the tank or the tank to the body gorund .!!!
Sounds good so far yes you should get really good oil pressure. To help in that area I would have cleaned the valleys debured the intake vallyes....
A bad ground some where on the motor to body. That one of the top one. But could be the motor maybe the linkage is not set up in the right place...
A straight swap would be to use 73-80-83 the 80 after might have some metric bolts come pared to the 73-79 . The 84 -87 to have the wiper switch...
73-87 with V belt set up. Well there only really one set up that work if you’re using the #1 350 -305 factory none A/c none air pump with power...
That would be the easy way as said above with both set up's , and if you do not have a hoist. I would take off the front wheels put some old rims...
You need to use steering column With all the same option that your column has for 84-87-89 for sure the 84-87 ie: option: tilt, highbeam,...
What did you use as a spacer for the bolt for the power steering bracket bolt? It does not look like steel or alum. Have you looked at the header...
Do you have a pic how your headers and power steering set up is hooked up. To try to give you better help or better idea's to try.
Well 305 can be built up to around 390 - 405 hp but can't find the write up's on the builds. The 350 can be built up to 500 hp about. but these...
It depended what you want the truck for most of the time. Also what you want the truck for mean power, or to get around save a few bucks in fuel,...
That a good point, very true.
The larger 168 teeth that for the bigger starter. The other would be smaller 152 teeth that the smaller one.
Separate names with a comma.
