As far as the two small terminals go I think one goes to the coil and the other is from the ignition. Your coil is surley powered from some other...
I had similar problems with my 2003 Z71. After a couple front end rebuilds and the dealer telling me it was my imagination I got the truck fixed...
The are way to many ways that this could be wrong. It sounds to me that the circuit board on the guage cluster is bad. If it is good start...
The TH350 cost savings is only short term. Them 700R4 will run highway speeds at less RPM's in turn saving alot at the pump.
Sounds like the thrust rod is too short. One sign that you booster is bad is if the brake pedal is hard to push down at first and then goes soft...
Seats out of a 99-2006 will fit but it is a little tight. If you go that route get them out of a GMC. They are more comfortable.
Love the catch can. Nice touch. The bed looks like it belongs on her too.
You shouldn't need two fuel pumps. Make sure your connections are tight. Try to reprime the carb. I would use a cup with gas in it. While trying...
I'm not sure about that but it cost me about $100 bucks to have mine shortened, balanced and new U-joints. And that was Alaska prices.
It might not be advancing. I don't know if you have mechanical or vaccum. If it is idling too high you have to much timing in it and need to back...
Those were dealer installed bumpers and not factory.
Might try looking at the choke settings.
Does your heater have a resistor on it? On mine there is one behind the glove compatrment. When these get old they put more resistance which in...
Go with a 600 cfm. With the carb you might need to get an adapter to make it work with your manifold or do the upgrade to a performer intake.
The new spindles will actually be designed for disc brakes. You can get new rotors from any part store 73-87 chevy truck fairly cheep.
I have the same problems. If you look at the chrome pieces you can tell it is really thin and poor quality and that is from all these suppliers....
Separate names with a comma.
