It's all on what makes you happy. For me the 700R4 swap was the way to go. But if you like banging gears then keep the stick shift. Is it four on...
If the hub/drum is original then they are riveted together. After removing the cotter pin and nut you can attach a slide hammer to the hub. You...
Check you chassis ground. It sounds like a loose connection. You'll have 12VDC with nothing on and when you try to operate something the voltage...
Finally the beast rides again. Somehow some needle bearings separated from the steering box and were sucked into the pump. Both parts were nuked...
To me it sounds like the neutral safety switch is either worn out or out of adjustment.
Sorry I can't help you out on the relay question. If you had a 63-66 I could though.
I've used this on my 283 when I changed all the gaskets out. So far no leaks after 2 years. Also I reccomend checking the block and head for...
If you buy a 350 long block you shouold be able to use most of the parts from your 305. Depending on the carb you might need to install a bigger...
Check your battery cables. Make sure they are good at the starter and the neg to the frame. Also check your neutral safety switch. Other than that...
Buy the 4X4 and swap the bodies. After you are done, sell the 4X4 chassis to get some of your money back.
Okay I got my answer, 1968-87. Looks like I'm going to have to do a little welding on the frame. Since I wasn't using the highly recommended...
What year power steering box do we use to add power steering to 1960-66 trucks? With the truck running I can only turn left but if I shut it down...
I would recommend doing a fuel pressure check to make sure it is not the fuel system. If the MAAP, TSP sensors are good then the next thing to...
Check out Randy's for both upgrades. http://www.ringpinion.com/PartCats.aspx?SearchMode=Make&MakeID=3&ModelID=290&Side=Rear&DiffID=34
You can also try these vendors in addition to Classic Parts. http://www.classicindustries.com/ http://www.lmctruck.com/...
Try listing your missing pieces here. You might find what you are looking for.
This is just my opinion. These trucks are not worth a whole lot of money, so to me it is more important to build the truck that I am happy with...
If these sites don't have it then it is no longer made by GM. http://www.gmperformanceparts.com/ http://www.acdelco.com...
You might want to try Jegs or Summit to get the correct pulleys. Also double check to see if you have a SWP. It is important that the crank and...
Brakes on cars and brakes on trucks are two diffrent things. You can add posi traction and disc brakes to your current rear end.
Separate names with a comma.
