Try www.obschevy.com or www.gmperformanceparts.com . Are you trying for a 100% stock show truck? If not there are plenty of aftermarket parts to...
I also went through the same problems for years on my 66 with SWP. Here is how I finally fixed it. I replaced all the pulleys the old ones were...
Put the items on EBay. Make sure to take good pictures. If you truly want to be rid of it all start the bidding at $1.00. The larger items might...
If you have no tranny then basically your going to eat a core charge so get what you want. I'm not sure of your options if you keep it three on...
Can't go wrong with a 700R4 swap. Just make sure it is set up correctly. When you are shopping around for a new or used tranny get one with a...
Take the old one to the local parts store or whats left of it. If you don't have one at all just take the filler neck so you can get the correct size.
Timing might be out of wack
Have you changed anything recently. If not you might have a short. Start by checking any old splices and the steering colum wiring harness.
So it started when you made right turns? Check the harness' near the steering column. It sounds like a wire has been chaffed by the column.
It could be several things. First check the left side shoes and make sure they are on the correct way. If they are flipped it causes that wheel to...
I installed the 700R4 in my truck. The drive shaft was shortened 2.5" and a new crossmember was installed. A TV cable was installed with a TV...
Remove the wiper cowel and spray a little white lithium grease on all the piviot points.
It should be Chevy Blue. You should be able to find it at an auto parts store.
I agree that you shouldn't go over .060. But maybe you can have your block resleaved.
The transmission needs to be sized to the horsepower of the motor.
Using a DC voltmeter have somebody push the horn button and check to see if you have proper voltage. It should be either 6VDC or 12VDC. If you...
I'm not sure they came on the blocks back then. But if you want to install a set they are bolted to the heads. Also there is a lifting bracket...
After 6 months I'm back home. Gotta dig out the truck from the garage.
Just my 2 cents but what is the mechanic for? If you don't work on it yourself then every time you have a problem you will be hauling it off to be...
Check that wire for voltage. The resistance is used to reduce voltage in a DC circuit so that being said it should be lower than the voltage at...
Separate names with a comma.
