Well if you like the power of the 292 rebuild it. If you want a more modern setup put a 350 in it. My choice would be the 350 because the parts...
No I dont think it will. Under suspension travel you will get in to the lower corners of the fenders Rick Bradley tech2@chevyduty.com...
No mount the engine with the "birdlegs" on. That way you dont change the pinion angle. This way your asured it will work Rick Bradley...
Sorry that idem has been discontinued Rick Bradley tech2@chevyduty.com 816.741.8029 ext. 500 816.741.5255 fax
Well in 61 they had hydraulic clutches big blue that is the right way to bleed a clutch sounds like that should fix your promlem thanks for the...
I cant believe a drill bit wont drill a door panel screw? I did one here went right through it.Is the head still on the screw? are all of them...
I need a little more to go on. What year do you think it is? You are wanting to find out the year of the truck right? Or is that a number off...
yes if there is fluid in the hose the modulator is bad it is easy to change Rick Bradley tech2@chevyduty.com 1.816.741.8029 ext. 500
Raven I found a N.O.S vent (wing) window it has the vent handle assy on it ready to go $35.00 give me a call if your interested 1.800.741.1678...
Sorry I was thinking 67-72 ill look to see if I have a good used one. They don't offer new ones Rick tech2@chevyduty.com
well it looks like there not even close here is the valve lash out of the shop manual http://www.chevyduty.com/forum_pics/valvelash.jpg Rick...
I FOUND THIS ON THE NET IT MIGHT HELP YOU OUT I see so many questions on installing S-10 T-5 transmissions into old trucks I thought I'd...
Are you talking about the vent handle post? That goes through the glass? Rick tech2@chevyduty.com
[font size=1" color="#FF0000]LAST EDITED ON Mar-14-01 AT 01:39 PM (CST)[/font][p] well I was always led to believe orange but people have...
IM sure there is a company that offers that. I seen a magazine with a 53 with suicide doors ill try to find it. Maybe you can call the guy to find...
yes they will work fine I think that the Saginaw has a course output shaft (not sure) If so you will need to change your yoke Rick...
yes just unthread the nuts then you can remove the shaft and to my knowledge the lower balljoints are pressed in RICK BRADLEY...
Well there is different types of blasting. Allot of people use sand blasting and it's ok but... if your panels are big they could get warped so...
Ftyler,You dont need to prime the carb. But as you said in your post it is real simple. Just make sure you use a new gasket and you should be fine...
Go to a book store and find a book called Chevrolet by the numbers you can get it at barns and noble. I know they make a book for the cars you...
Separate names with a comma.
