I replaced the ones in my truck, metal one froms from parts truck.. had them media blasted in and out.. repainted and installed. yep kinda a...
ok gave up on the yf... it just lecks gas all over.. don't know why, pulled it apart many times.. just dont know. (repbuilt total cost 150...
nate, uh no not certain, never have replace the fuel pump.. same pump i have had for 18 yrs.... why would fuel pressure be high? would have to...
my Tuck is 6 volts, i installed heavy gage copper battery cables and connected the ground to the bellhousing.. per some suggestions on post. i...
Nate, good to here from you, yep all tuned and adjusted, valves gapped.. all done to the letter of some of your earlier post. new muffler no...
ok thanks.. checking my spring i broke it.. was in preatty bad shape. so have a new one on order.. sounds like it was hooked up correctly before...
what position is the heat riser supposed to be in cold.. mine the spring is holding the flapper so exhaust is diverted to warm intake in the cold...
thanks ken, thats awsome!
yep the heat riser seems to be fine.. swings free.. spring not broken.. suppose i could wire it in the open position.. and see if that fixes the...
just ordered a in line fuel filter for 1947-66 trucks from our host.. have another carter yf carb comming, and new carb insulator. going to...
the manifold flap is working fine.. wondering if it has something to do with the heat of engine.. it does have the thermal break fitting where it...
ok just replace my rochestor b with carter YF, 216 engine. runs and starts great.. but i cant make it around the block. when engine gets hot and...
ok heres the deal. disconnected the wiring harnes.. so only starter hooked up. disconnected neg bat cable from post. volt meter from post to...
ok heres a stupid question.. how do i tell if i have draw across battery with multi meter?
ok thanks will try these tips out.. I am sure its not the battery, because I charged it and pulled it out of truck and let it sit on my shop...
i have a 1953 chev pu.. push button door handles. I replaced my door handle, door latches and door strikers.. with after market.. they have be...
yep already have a grounding strap from same bolt on belhousing to frame. i was contemplating removing it to see if it made a difference. I...
ok 6 volt system..216 engine, 1953 1/2 ton pu, stock. i upgraded my battery wires to large gage and routed the ground wire to bellhousing...
thanks yep I am definatly going to add the sway bar. pickups nw (dreamers) has one for 150.00 locally so I am going to run down there and pick it...
I have 1953 chev 1/2 ton. stock. tends to wonder/drift while driving, also roll around corners.. typical for a 1953 stock truck i am sure. I...
Separate names with a comma.
