LS in a pre 72 vehicle is crap. Young turds really know how to ruin a nice old car or truck.
Man, I hope nothing other that gas and air made it into the cylinders. If you have a filter, make sure it's clean. Make sure your lines and tank...
I just finished installing the headliner,bows, windlace and windshield mouldings and the cardboard headliner went in easy. The first thing I did...
I never said anything interchanges, merely that it's the "New" SBC! Peace:)
The LS is just a new generation SBC, so the Belly Button is alive and well. Personally, I prefer the old mouse motors.
Crap!
Axles are rarely "bad". Often times, just the seals leak oil. No big deal about the saddles. Just paint the axle. According to your 1st post, you...
As it's been stated, make it a family project and it doesn't have to be built in a day, like Rome was. My truck is still in process of being put...
All horns have some type of relay. Do you have one?? If not, maybe that's the problem.
That's a problem. Have you tried rethreading??
Do you have a original steering column?? Are you referring to the 2 piece "donut" that holds the steering column to the dash??
Once the gauges are removed, look for tabs in the back, and bend them out. If there are no tabs, then the bezel is crimped all the way around, so...
Patrick's sells a kit to adapt a Saginaw 4 speed to the original torque tube. Other than that, there are plenty of 4 and 5 speeds that will work...
I purchased and installed the basic Classic Parts wiring harness and it was easy. Don't rush and triple check each connection.
a couple of things that I forgot to mention. Use the brass ones and put a coat of Prematex on the outer edge of the plugs, before installing.
The large freeze plug goes on the rear of the engine. Napa should have them as well as places like Chevs of the 40s, The Truck and Car Shop of...
The windshield trim holds it on, but you'll need openings at the edge of the headliner for the trim screws to go through. Making a hole for the...
That's one of the 3 things that makes me wonder "what hell is up with that crap!" The other 2 things are the LS swaps and the S10 swaps. You'll...
It has to do with age. I would clean the area and put some gasket sealant.
My knob is chrome metal. Here's a photo: [ATTACH]
Separate names with a comma.
