Side A rides against the pressure plate fingers. Side B faces the transmission.
Perhaps the details on the attached link will help identify the power steering pump you already have....
You can also try Tony Smith. He deals mostly in 64-66 trucks, but also has a lot of stuff for 60-63's. Good luck. Tony Smith 4-5-6 Chevy...
I'm not a fan of lowered trucks either. Mine rides unpopularly high. I'm running stock front springs on a 1975 front suspension, and Sky Jacker...
Something easier to check is the points. It is possible for the rubbing block to wear sufficiently to close the gap which throws off the timing...
Good luck on your relocation, and getting through the transition period.
It can be. The last time I had the problem I just pulled the head, replaced the gasket and reassembled. Depending on the age of the engine and...
If you have an automatic transmission with cooler lines that connect to the lower radiator tank, it's possible there are leaks in the bottom tank...
The 60-61 hood is very hard to find in good condition even in the United States, and can cost up to $500 or more. Many people buy a parts truck...
My truck sits on a rake and water pooled in the front, so I drilled a half inch hole in the very forward end of each angle strip where the bed...
Wheels and tires always make (or break) the car. Those stock wheels and caps are a 1000 percent improvement and make the entire truck look like...
Here’s my 1960 wearing 255-70-15 rear tires on 7” rims. I’ve also had 8” rims on the back with the same size tires, and everything cleared with...
I believe these are off a Chevelle from about 70-72. I haven't been able to find an original photo wearing them, since almost all the studio...
It depends a lot on what you want to do with the truck. If it's a stock restoration, a side mounted spare provides interesting detail, especially...
The easiest way would be to pick up a new 1960-61 headlight harness from one of the aftermarket suppliers....
Perhaps the following threads will help you out. The 1st has to do with big blocks, the 2nd pertains to 60-62 sbc mounts, and the 3rd relates to...
This link should help. Good luck - http://www.64moneypit.pages.qpg.com/6066chevytrucks/id37.html
So what are you going to install now, a Richmond 4 or 5 speed, or something else?
Wheel selection really is the primary reason for changing patterns. Next in line is the cost, since later 5 lug components are old now and...
The original gap of .035 should be opened up because the hotter spark of the HEI can easily bridge the larger gap, initiating a better flame...
Separate names with a comma.
