Do you have a picture you can email me? e.knecht@comcast.net
Welcome New guy. Boy if the truck has been sitting since the 80's you are probably going to have to remove the tank and have it cleaned. After gas...
RE: What's the truth about exhaust Yes sir, the first guy is right on. There is a lot of math to figure out the flow characteristics of a matched...
Thanks Tech 1 fax # 708-534-0398
Hey Tech 1, Do you have a picture of how the king pin parts assembly for a 56? I dont trust the guys who worked on the truck before I got it. Also...
Hey Ftyler. Do you have the casting numbers off of that trans. I have a 56 and the shifter portion might be what I'm looking for. Ed
I would go with the 3:73. I had one with a 4 speed trans, 15 tires. At 2600 rpm it was running 62 mph.Got about 15mpg with a 350hp small block
There was an article in Ithink Classic Trucks magazine and it was on the front cover. It looked pretty sharp.
RE: Shifting from 2nd to 1st on a T Sounds like the clutch isnt adjusted right or the trans syncros are about wore out
Hi Keith, I have a saginaw 3 speed that came out of my 56. I'm swapping it for a 4 speed. If I rember right the date code was 65 and its got a...
If the penetrating fluid doesnt work you'll have to dis assemble everything, clean out all of the old grease and re-grease. Whats happening is the...
Hook up the wire to any 12v source that has 12v when the ignition switch is on. Dont hook it up to a "all the time" 12v source you'll kill the battery
Depending on the year of the 400 pontiac motor it could be pretty kick ass.How good of a install is it?
when you say "dripping" on the left side, where at? Depending on how old or miles are on the carb it could be that the shafts that open and close...
Heres the math guys. 350cid divided by 2 then divide by 1728. Multiply answer by 6500 rpm..=658.27515 x 85% =558cfm Volumetric efficiencies will...
RE: Fuel Cell - Gas Tank whats the You can use a "fuel cell" in a every day driver. They are very impact resistant.True some dont have a baffel...
>Might be a little too much carb cfm for a stock 305. I've >got a 305 with a RV cam aluminum intake and a 600 and it's a >fresh motor and it...
what year truck? I have a complete carrier assembly from a 56 if your interested. It was a Tennesse truck and is in great shape. Ed
[updated:LAST EDITED ON Jul-01-03 AT 08:17 PM (CST)]Well if it helps I once had a 73 ElCamino with a 350 and a 3.73 rear end and a 350 trans...
Does anyone know what other year seats will fit correctyl in a 56.
Separate names with a comma.
