measure your axle from brake drum to drum-and get measurements for camaro-and that will tell you. One of my friends used a a camaro with no...
I paid somebody to in a cpp kit for power assist,and it works very well. also upgraded wheel bearings,replace all tie rod ends,bushings,etc. Make...
I have changed my wiper motor before-and I know you have to be a contortionist to reach under the dash,but it sounds like you have removed more...
I had installed an nos turn signal assembly into my truck-and I still have the used assembly complete with wiring,mounting brackets,etc-in case...
you would be amazed as how few trucks came with any accessories at all! I have never even seen an original one of those on a truck,although they...
there is a stamping on the passenger side tube. I you scrape off the gook,and clean up the tube-you can find the numbers which will id your rear end.
RE: Harmonic Balancer installation they make a repair kit,but while it is off I might price a new balancer.There probably is a special tool,but...
sitting mightly low leaves room for your roots blower. Seriously-take a look at a stock set-up and measure it-it sits pretty low also.
RE: Stock temperature gauge/sender This may sound really weird,but my 383 stroker would peg out the temperature gauge as I watched after 3...
they regularly sell used ones on e-bay. If you have non stock 6banger,it might be easiest to use an aftermarket linkage that you can customize to...
I have heard via a radiator shop that aluminum radiators are not too special in cooling ability,and that you may benefit from using a custom...
you will need to find a location that looks acceptable to mount gauges,since the dash is so small there isn't much choice than to mount...
thse should be easy to cut from a junker's wiring harness because when people sell used instrument clusters,they rarely do without unplugging the...
i'm sure that they make stroker kits for most any chevy small block but I remember reading that clearance has to be made on the blocks for...
for half ton-1969 chevy had the same width differential from drum to drum.Maybe the same would be true for 3/4 ton?
RE: GMC and Chevy rearends differen to further confuse things, I had a spicer 45 that was original option on the 1959 chevy,but was...
I saw a fleetside 4x4 that had a blazer under it
I had a custom made hitch put between the frame rails of my 1959 fleetside such that it fits mostly behind the rear bumper,but projects just under...
luckily zillions of repro parts are available for these trucks,and are many reputable dealers.Be selective on whether you use salvaged parts to...
RE: Metal prep questions for emblem emblems are pot metal,not stainless.Whatever the compositon of pot metal is-it is prone to corrosion.As far...
Separate names with a comma.
