Oh I should say that C ( 1/2 ) is one less wire then the K ( 3/4 ) does on the rear wiring.
I not to sure because I have never looked at the 68-72 rear wiring to see if there the same. As the 73 - 87 tail end wiring from the Rubber plug...
( or the dual tank valve suck air or not open enough to let enough fuel out). So you lot 2 pounds of fuel pressure just enough cause that...
If I remember right I think the 400 and the 700R4 are all most same lenth but the mount are in different places trans member has to move. or you...
Very nice truck. That so true
Tow Cam is a Cam more set up for low end TQ on the rpm curve more hp low end, but on the higher side on 3500rpm 4500rpm start to drop off. it's a...
The trail weight is 5800lb that a a good weight behind the truck that is most likely around the same weight. The 350 has to do so work that a lot...
This has been answered on this link.https://talk.classicparts.com/showthread.php?t=7996 If it is rounded a bit press down as hard as you can...
On the 1973-87 boxes ( full, med, step ) the gas tank set up is, to go half under the cab on the out side of the frame & half under the box.The...
Here try this or yuo want used oem? http://www.classicparts.com/prodinfo.asp?number=61-264 was $214.95 +shipping taxes:)
It should give you the weight on the Vin alum plate on the driver door piler below the door stricker 1973-1978. And it might have some more info...
That great have not worked on the engine wire for some time now, I could not remember for sure what it was.
yes as said the 1980 was a cross over year you could get both .But most would be Metric in that year. 1981-1987 would be total Metric fitting.
Well the host of this site does sell them parts in there shop, look at there on line book of the 1973 -1987 the years your looking for would be...
Just a note of safty just in case you do it and you or some one not thinking;) some times it happens. I would makes sure the truck is on flat...
I belive that G51 is hd rear springs code.
It sounds like your try to move the hinge on the piler and not the door side. To get the other bolts you would have to take dash and kick panel...
Yes the 88-89 maybe the 90 BLAZER,SUBURBAN . Your truck might only have the single head light set up. As the 88 and up all have duel headlight . I...
Yes they can, be seperated but it makes it easier if they be seperated in place with the in cab not undone first. Try to gently pull it out there...
For Question two the center bolt on the fire wall engine bay side has to come out the the should be two long screws bolts on the is side. Then...
Separate names with a comma.
