Thanks for the patience on this. I have been busy labeling wires. I locate each end then use the description from the loom instructions. I have...
sorry for the delay. I live in N.Calif and our power has been turned off several times. The four wires The four wires in the loom going to the...
Bill- I see, determine exactly what each wire does .... of course. Will do and report back.
Additionally, I could use some suggestions on how to connect all these wires at the back of the truck: Bed roll lights, 3 wires Left/right...
Sorry Bill, life distractions for a few days. So #1: there are four wires as part of the wiring loom from the firewall back to rear lights. Not...
I had been told to avoid braided because of corrosion .... and to use an insulated one instead. I am fine with the braided. Just found some of...
Bill and RidesWithYah- really appreciate you thinking this through with me. The explanation of the use of a relay really makes sense. Being...
They are the wiring loom going to the back of the truck, routed along the frame. I believe there is a wire for: illumination, turn, brake and...
Thanks again Bill. Always appreciate you inputs. I am seeing the wiring, as simply as possible with much ass you described above. I have the...
On my ’51 3100 I plan for it to have the following: -Bed roll LED lights, left and right: Illuminated brake and turn- 3 wires -Taillights,...
Thank you for this. Might as well do it right while I have the chance.
Yes, more specific: The front fender bolts that attach to the inner fenders.
Does anyone know?
Good reminder! Thanks again Bill.
Thank you Bill! Really appreciate you taking the time to post this. Haasman
I am wiring my '51 3100 with a simple OEM style harness. Where should I connect the heater blower motor and lighter? It seems everything routes...
Clutch head bolts or regular hex heads? Haasman
Zig- did you do fronts only or both F & R disc brakes?
Thank you. Question- how are the bed sides held on? They attach to the front panel and the front panel is held in place by bolts to the front...
Pacifically, the metal cross pieces called sills. I want to make sure I have the correct ones, in the correct locations so I can install the...
Separate names with a comma.
