Great tip! Thanks Haasman
Getting ready to install the bed metal pieces (sides, front etc) and after looking through lots of threads and postings, still not exactly sure...
Sorry for the long delay in replying- what I mean is the connection across the horn contact at the top of the steering column.
I do have a relay. The work on my truck is a total restoration so I am bring all the parts and pieces together. When I ran the wiring for the...
Bill- yes I do have the wires running up the steering column and to the horn button contact. The problem is this horn circuit is always on. I...
Am I correct that the steering column is insulated from the truck body at the under gauge area and down at the firewall? Thus the horn electrical...
You are a good man Papy.
Nate- So you are saying that Chevy Duty is Classic Parts, our host, and they have the correction glass thickness? Haasman
And as an old clever mechanic told me: Never take out the drain plug until you first take out the fill plug. (If you can't fill it, don't drain...
WHAT! THINNER GLASS .... damn .... really?!? After all that frickin work .... Haasman
Just started working on the wiring .... I found using a trace wire and a volt ohm meter that has an audible continuity speaker is of great help....
interior heater motor cover Here's another little project on the truck that ended up quite good, but threw me for months ... The interior heater...
Thanks Steve. As I have posted before, never have done anything like this. I decided I wanted to take my time and do as good a job as possible....
I installed the fuel tank, lines and electricals to the sending unit. Following Nate's and other's advice, I put this fuel shut-off under the...
Has similar issues with the '51 3100. Decided to replace the glass since there was some pitting and ..... at this point .... do the windshield...
Here you go [IMG] Haasman
I am looking for a seat adjuster rod. Anyone have one or know a source for one? Haasman
Yep got the tubing. Wanting to know the connection point on the engine and if someone can provide the fitting size. Haasman
Back to work Took some time off from the project. Needed to get out of the cold garage and just take a break. Back at it again. Almost done...
Realize this is an old thread .... oil line To confirm- -the yellow line points to where one connections the oil pressure gauge? -the green one...
Separate names with a comma.
