Hear hear 50 Chevy LS3. At least give us the choice. Don’t force it down our throat. I wonder how many politicians have had to tear down the...
Thanks Nate, will do. I think I have a pretty good idea of how it’s suppose to be wired. Will try to confirm. Dave
I have the manuals but it isn’t clear exactly where on the fuse block to connect. It looks like the red and gray wires are connect to the same...
Solenoid. No foot starter.
I may have found a place in Maine that seems to repair them. Found it in one of the threads for the earlier trucks. It look like the same one in...
[ATTACH] While waiting for a package from our host I decide to tackle the heater. This is what I uncovered, Core look pretty bad, it says...
Thanks Bill. I took it apart per your suggestion and the contacts burnt and pitted and broken. Not salvageable. Have placed my order.
Many thanks Bill, The GMC schematic is closer to what I have then the Chevy diagram. Either way I can make it work. The continuity check...
Thanks for the response Bill. You have confirmed the way I wired it, the pink to the IGN 1 post. I do have some wiring diagrams but not all...
The electrics on this new truck I picked up has been a friggen challenge. I have found a number of wiring errors and my lattest is the bypass...
Does anybody have a good picture of where exactly where the three wires go (red, pink and grey) on the fuse block. I know they go to the fuse...
Had not heard that before Nate. Will try. Thks.
Thanks Nate, will do. Truck has sat for 10 years and found the parking lights were intermittent. Took an ignition file to the contacts and that...
Guys, here's is my thought. Rather then putting the relay system in for the halogen bulbs I may go back to the original bulbs (low wattage)...
If I go back to the original head lites will this cure my problem?
Good idea Nate. Thanks.
Thanks Nate. Will have to dig out my vacuum gage.
Thanks, got it. will look it up
Question today: Any other solutions for the thermal cut brk opening when using halogen bulbs on the head lites. I read a thread by Steve in...
Thanks Bill. Good explanation. Question how long should I make the piston stop?
Separate names with a comma.
