Make sure you have a good ground from your engine to the chassie. Chris
Sounds like a good deal. You can tell what size engine it is by the numbers on the flat area next to the distributer(first three numbers) I'm...
You have to use a contact type glue(3M). You have to put the glue on the door and also on the seal, then let the tack up. It takes about 12 feet...
Hi and welcome, Its a pretty common change out, the 216 to the 235. There was a poured babbit 235 available for the bigger trucks thats like the...
Hi Salty, You need every thing you listed. You will need the window channels for 47-50. If your truck is a 49 than it dident have vent windows....
Remember when ford started building the newly designed 61 pickup and put the old 60 and earlyer bed on it? Yuck.... Chris
I would bet that 54 had face and bed transplant. If you can find any original paint on the various parts, that might explaine that.
The paint I'm using on my GMC is Dupli-Color Chevrolet orange red DE1607. About the closest paint you can find in a rattal can. Chris
A couple things I would check first. If your wheels are in balance, make sure your rims are not bent. If you suspect the drive shaft, sometimes an...
I'm thinking your turn signal switch is bad, but I would check to make sure you have good grounds on your front turn lights. chris
Sounds to me like your gas turned to varnish. I've seen it happen before, just like glue in the guides. Chris
Ken, this harness is just like the original, except they use plastic covered wire and regular connectors. It is configuered just like the...
Ken, The harnesses classic parts sells work very well, very easy to install, already wired for turn signals. Wired about a half dozen trucks with...
Sounds like a bad fuel pump to me. I've had them go bad and make a bad racket like that. You should be able to pull the pump off and the arm is...
Are those 6 lug wheels Nate?
What tranny do you have now Zig? I know your converting to 1/2 ton. So like Nate said get the right cruzing ratio for the rear end. Get the thing...
Bead Lock tool Just installed a back glass not to long ago myself. Install the rubber in the cab first then the glass into that. Then with a lock...
Oh baby! Nice peek-up Kevin, bet it drives nice....:D
Thanks Nate! Thats the great thing about these forums and the internet in general, Tons of information. Chris;)
Fish eye Good point Gater, I always install all my glass after I've painted. The can of silicone that I have comes out in a foam. Guess I...
Separate names with a comma.
