Here are some calculators that you may find useful. http://www.wallaceracing.com/Calculators.htm
Thanks...yes, tubular trailing arms and air springs for the rear suspension. Tubular control arms and air springs for the front. I'm still...
I tend to approach this by answering a few questions: what size tire I plan to run (diameter mainly); what transmission type (gear splits and...
...parts are going back on the frame slowly, but surely. Final mock ups of engine/trans for driveshaft measurement, and rear-mounted gas tank and...
If you like the width dimension of your current tires, you can always go to a 70, 65, or 60 Series tire that will have a shorter sidewall profile.
Thanks! I'm looking forward to working on a chassis that is not greasy anymore. :p
Thanks! I boxed most of the frame, fabricated and welded a battery mount to passenger rear, transmission cooler mount, exhaust hangers, rear gas...
Well, after tearing the truck down, again, I was able to finish the frame modifications I wanted to make, and was finally able to scuff it down...
IIRC, you'll need to use an adapter. I believe there is a more modern aftermarket-type of adapter that is readily available from Bendtsen's...
X2...the license plate bracket (with integral light) mounts to the center of the bumper. Then, the license plate bolts to the mount. BTW...nice find.
email sent. :)
I have an extra one that I am not going to use. Send me a private message if you need it.
email and file sent. :)
I have a GM engine block and cylinder head casting table...the file is ginormous (45 pages), so it's not really attachable here. If you want to...
Yes, the 473483 is a 1975-1976 250 ci block code.
Very nice! Placing the muffler under bed helps reduce the drone in the cab. :cool:
...I'm most likely going to paint the bezel the same color as the rest of the dash - the same dark metallic green as the exterior of the truck....
I originally did the numbers and hash marks on a graphics program and sent the file to a local sign maker/vinyl lettering shop (they did some of...
:o Thanks...and here is the result after applying the vinyl lettering output to the back of the polycarbonate lense and the hash marks to the face...
Hello. There is no visual difference between the 0-90 ohm and the 0-30 ohm sending units...the difference is the resistor assembly is calibrated...
Separate names with a comma.
