Once the doc said my shoulder was well enough to tinker it was hard to the garage door closed. The AC is from Old Air inc. out of Texas.the...
I gotta saw for that door. LOL
I always thought you (Tim) were one of the sharp guys on this site.That idea of crossing two wires is one best tricks i've ever heard of .I'll...
I did drive it around the block and had a few minor issues.I need to change the pressure valve in the P.S pump to slow down the fluid and quick...
Love the shop.The wife and I had a good laugh at the potty decor .Thanks for sharing. Bobby
At the Long beach swap meet.There web site is www.gemstreetrods.com .I wrapped the wires with black plastic and adel clamped to the firewall.Had...
Moments away and will drive it today if only around the block.Heres some pics to ooh and ah over. I hope.I'll add more later today. Bobby
many areas to check here.Bump steer.Not the bump steer that one would consider in a race car. abut the one you hit a bump and it steers.check the...
AC/DELCO has a web site and i believe there is a link for international locations that may help you Bobby
I was told that no bolts were used on the ends was so the metal could expand,since the manifold is a two piece assembly. It may or may not be true...
thanks Nate,I've raised the motot up a 1/2" for clearance at the header . I still may add the cooler though.Thanks again.Down to the short list,I...
I bought everything as a kit. hose kit included crimped metric fittings for the gear box and cut to length for the P/S pump.
I used a GM pump that came with the crate motor . I used a tilt column from Flaming River . I did cut down a stock column with a u-joint at the...
Yes i did use the toyota gear box and bracket from CCP. Heres a few pictures.Let me know if you need more
160 is about normal. 130-140 a little low but not anything to worry about.your with-in 10# of your lowest cylinder so your okay.do a compression...
check napa. they usually carry dorman products and as i recall they make and/or supply that spring Bobby
when you had the original fly wheel ground .how thick is it now ? I'll check a couple of my sources to see how far you can go. I'll also check my...
fender should fit fine. something may be tweeked a little but it will work. Bobby
One thing you may want to check that can be heat related would be the condensor. I know this is a part that either works or doesn't work. It maybe...
I don't know if these will help.This is the assembly where it goes from 1 cable to two that activates the rear drums. Good luck Bobby
Separate names with a comma.
