The power flows left to right......as you are sitting n the truck. 12 to the left, near empty, out to sender from right, near full.
The vinyl decals are all I have been able to find. They work wel, just make shure the under surface is clean and smooth.
Disconnect arms, let motor park. set arms back on rocker in park position. If they work backwards, switch arms on rocker. Also make shure the...
I have had to bend the rod a bit to make shure it will register full. I bent mine a little much, so when the needle starts to move from full I...
But I'm cheap/ poor....and they want serious money for those! I'm a beg/ borrow/ swap/ steal kinda guy.........
Under the bed on a swing bracket.
The dash is "Sheen Grey Metallic" from Jim Carter. It is supposed to be low gloss. It matches the grey in the dash trim. The brown in the dash...
Nice. Looks like you have the tools to do it.
If you aren't going to use it, send it to me....I have been trying to find one.
That is the rear I am running. It is great.
wolfcub's HEI install in straight 6 https://talk.classicparts.com/threads/my-hei-install-and-test-video.21632/
Slide back as far as possible, leave a 1-2" space between it and the firewall. Set it level (or close to it) at ride hight and weld them in.
Should work fine, the key is to pull air through the whole radiator, not just the center. SPAL usually makes good products. I have had great...
The temp sender comes out of the engine. It does not come apart. if you bend or break the tube, the magic gennie gets out, never to return. You...
Looks to be a flat version of the steering wheel color.
You can run the 0-30, it will just stay pegged. I don't know of a stock style replacement voltmeter. You can hold the mechanism still in the...
I like it, except for the kick up in the bed and the digital guage.
The grease was hot when it went on, heat will help take it off. Use a propane bottle or heat gun to heat it up then scrape it off with a heavy...
Make shure the spring that puts tension on the lock bar is working. I have found one stuck through the floor, not doing it's job.
http://www.jalopyjournal.com/forum/social-forums/a-d-truckers.116/ And here on the HAMB
Separate names with a comma.
