Well it starting to look good. It feel good after you get a nice job done, glad it came out for you. Looks good keep [IMG] coming
You could get a 305 W\Heavy Half but most would have been 350 or "454" if you had that motor option that year. the saleman would try to push the...
I should be on the driver side seat belt in side near the rear they might have cut it off on the seat belt left it on there . I well try to get a...
Orange wires white white are for the top dome light & cargo light heavy gauge that from 75- 87 for sure. Heavy86Chevy is on the right track can...
This is one of the book you should look for Chilton book GM full size truck 1980-1987 repair manual. Found in most auto parts store or wal mart...
Are you looking for the heater control rod or the heart control because controls have some clip tabs on them too. witch end the fire wall side or...
Here a nother Little trick if you got room to use a grinder with out hitting the belt. Grind down the top of the head of the bolt just a little...
Yes you could use a bolt of the grade 5 or better try to use a bolt that not threaded all the way & washers.
Looking for Left inner door handle 73-75 GMC in good to nice shape.Oh the rods would be nice to. This is what it looks like [IMG]
One thing to try is leave the PCV hooked up pull it out of the valve cover take it for a drive see if it still does it.As a though Maybe the pcv...
vincent The cluster with gauges from your old 84 chevy is that parts truck now?. If it is did you take all the sending units out for the gauges?....
1978K5 It sound like your got a wire crossed or missing a ground it's trying to ground throw one of the + side wires ("for the Flasher", bad or...
Grade 5 or better GM dealer should have some or a good auto store(example Napa), salvage lard if your lucky you will find some there that are in...
Did you strip it bad if not take a hamer pond on the top to flaten the top in a bit then you should be able use the T50 bit again. But use lost...
lol the T50 buy two at a time spray the top well, then go under the truck and look for the end that stick out that getts rusty spray it let it...
Ok I have to agree with you it most likely the the timmer, but disconect power form the Batt try to see if the cover will come off you might try...
lol that could be it too good point. ;) the TBI does use more fuel pressure then a carb does. But most TBI fuel pumps are in the tank. So if it's...
Just a question where have they or you got the power lead running off( change to keyed on power), is the left side running a electric fuel pump?.
Did this happen after you did the pump & tune up work.? The fuel filter is clean after the new parts, you might have to unplug the batt. Let the...
The rub motor mount is the same on 4.1 straight 6 but the motor mount bracket is different. The small block clam shell is the same for big block...
Separate names with a comma.
