THM200 - Light duty, "metric" 3 speed transmission THM200-R4 - Used in GM rear wheel drive cars with the 3.8 V6, 305 & 350 Olds and 301 pontiac...
1) Disconnect Battery 2) Reach up behind the dash and feel for a button on the side of the headlight switch. 3) press button in, and pull...
You REALLY need to invest in the Factory Service Manual since you are so deep into your rebuild !!! It's a life saver !! To answer the...
It may be the sheen of the PPG paint that gives it a goldish tone. What kind of light are you looking at it under ? It might look different in...
In a word ? NO !! ;) dv
BUMP !!! Coming up THIS weekend !!!!
To do it correctly you will need EVERYTHING ! The heater core under the hood and the air defuser under the dash. Nobody makes that in the...
I can't disagree wth THAT !! The TH400 will allow you to make significant performance modifications to the motor, OR go up to a big block...
What I was saying is that the six lug wheels, made for later model Chevy and GMC trucks are Hub Centric. The 5 lug rotors will fit all GM five...
According to MorTech http://www.mortec.com/castnum.htm It's a .350 from between 1980-85 and can have 2 or 4 bolt mains.. Val
This is the only one I've ever seen that I actually like. Probably because it's not a "rolled" pan and looks better this way. The owner,...
In a word ?? YES.. but only if you want it done correctly so the trans does'nt melt down in the first few miles of operation !!! I had mine...
The backspacing isn't the problem. The newer wheels are "hub centric" which translated means that the hole for the front axle bearing is smaller...
With the motor forward, shortie street rod headers will not work, ( ask me how I know ! :o ) Most of those style headers have the collector tube...
The 700 R4 is the way to go ! I used 373 rear ratio and still averaged 19 mpg with a PANEL TRUCK !! Freeway milage was 21-22 mpg. The 373...
For the 5 speed manual an aftermarket automatic crossmember made for our trucks will be all you need to support the 5 speed trans. The...
If the motor is in the factory location, and not moved forward, a set of Shortie Street Rod headers will just clear the front crossmember. A good...
So does the originator of this setup for our trucks, Early Classic Ent. http://www.earlyclassic.com Val
None made that I know of.. Val
Take a look at 3/4 length headers for a Camaro... I had the same setup as you, with a 700 r4 trans, and that's what I used. BE AWARE that some...
Separate names with a comma.
