If you are using the old bolts you might of bent them when you removed them. Put the tires back on the axle and remove the stands. This way you...
Beer can go a long way to getting the old truck runnin'. Soon I'll be putting in my $40.00 350 into the old nugget.
Make sure you buy the 63 manual and the 65 supplement to have the right info on your truck.
73-87 will fit
It would be a good idea if you are spending the time and money to take it to a machine shop. They can determin if the cylinders need to be just...
I'm running the factory 4:10 set up. I got the tranny from mad dog transmissions. You can find them on E-Bay. You will need to have the drive...
CPP has plenty of options.
Gas is getting pretty spendy these days. I put a 700R4 in my 66 and it's a world of diffrance. The old TH350 ran high RPM's (around 3000 at 70MPH)...
The only real advantage to the long pump is all the set up options. There is far fewer brackets for the short pump set up. If you are replacing...
The rod smack could be a lifter that is shot or a bent pushrod.
I made the mistake of installing the tranny first and dipstick last. It made it hell to get it in.
You can't add ohm's to that one to make it work. Maybe you can get the 0-30 ohm sender to work by adding ohms though.
http://maddogtransmissions.com/
I got my 700R4 dipstick from Mad Dog Lou. It's just a standard dipstick. It was real hard to get it in though but it dosn't leak at all. Also it...
That's one lucky kid. Frame work looks good.
More than likely you have a 4:10 rear. The carrier will need to be replaced to run some of the more highway friendly gears like 3:08. I have said...
I got mine used from a buddies 84 Blazer. They are the long style but the fit with mm's to spare.
Take a look at this web site and look at all the patch pannels they sell and compair to the ones that need to be replaced. If it only has surface...
I know this has nothing to do with trucks but I am so excited about the upcoming NASCAR season. Go Little E!!!!
Smack it with a rubber mallet while you have the puller on it. Also spray it down with PB Blaster. It works better than LW and WD-40.
Separate names with a comma.
