Take a look at the POR 15 floor board kit. If the holes are small it might work for you.
Cut a small knotch on each side of the heater control rod and you can use a C clip. It's not factory but who's to know.
63-87 will fit. Take the whole clip from an 80's truck. It's a bolt on swap.
You could also skip all that computer stuff and install a new intake manifold and carb. Most of those sensors are scrap after that. Sell the old...
You don't want much do you? Get a Chilton and or Haynes for both vehicles and compare wiring. Hopefully you also got the computer from the donor...
You can get patch pannels or whole doors from our hosts. There was a company making fiberglass hoods out there but as of yet the are no steel...
Take the body off the frame. This will give you easy acess to the drive train. If you want to lower it or redo brakes suspension ect. start here....
AC is not that big a factor on classic vehicles. However power steering is. Without power steering my wife wouldn't step foot into my truck and...
Wait till the Super Chevy Show. It has a car coral and the nice vehicles go fast. I think it costs about $30.00 for the weekend plus it gets you...
A Mojave heater is commonly used in Jeeps for extra heat and fit under the dash. They even sell a kit to hook it into the vents.
Mar-K was supposed to start selling them and then dropped them from the catalouge. Junk yards and swap meets are the only place to get them for now.
It will work for your automatic tranny but not a manual. You will still need the linkage. Locar makes a cable linkage for a colum shift automatic...
It sounds like your are using a 153 tooth starter on a 168 tooth flexplate. If the bolt holes are staight across it is for 153 tooth flexplate. If...
Check the in-line fuse it might be blown. If not the case your radio has seen better days. As far as installing it you have two choices. In the...
Try searching for a T350 crossmember. It should be the same. My 66 had a T350 with the origional crossmember. You missed it by a year, its in...
Truck looks great. I love the flat black look. You might want to look into a good flat sealer for the paint though. You don't want all your hard...
On top of all that other stuff you fan will move closer to the radiator. A smaller spacer will do the trick. Also make sure your drive shaft and...
I thought that the heavy half came with a 350 SB and there was an option for the 454 BB
You are going to need to retofit an 1157 socket into the tail lights. It will have two leads coming off it on for running lights and one for brake...
I am assuming that a peice of the block broke off. You need to get it welded back on. If the bolt itself broke off then drill it out and tap it.
Separate names with a comma.
