Boop, It's not really leaking, It's just marking It's territory!! Chris:D
Looks like 8 per side to me ken. Chris
Car turn signals Just in case anybody is looking(thinking) that the 54-55-1st unique to these trucks only, the 53-54 car, corvette are the same....
Hey Steve, it mounts above the windshild in the middle and up against the windshild rubber. Chris
Red beauty!! WOW Gater, Awsome job! Always so great to see another peace of our history brought back to life. Happy 51st!! Chris:)
Hey Andy, It was in the 55-59 catalog part #53-432. Chris;)
Andy, the 54-59 turn signal cups all used a wedge to secure to the colume. There should be a hole on the bottom side of the cup. CP sells new...
Hey Ruben, The rear pin only goes in (threads in) one way, from the outside. On The front shakles I don't think it matters if the zerk is in or...
Drive shaft Zig, I think you might be better off keeping the two peice drive shaft set up. A long one peice is hard to balance. Also just an idea...
Good 'ol GMC's To my knowledge chevy did not offer a long bed for there 1/2 tonners between 47-55-1. Did offer them from 55-2nd on. GMC's did...
1/2 Ton front axle Hey Zig, I was planning on converting my gmc in my aviator to 1/2 ton. I have a 3:42 12 bolt rear, and was just going to put a...
Bushings Hey Gater, Don't be afraid of the spring bushings. On the inside of the frame are holes so you can drive the pins out. A bushing driver...
Blue Baby!! WOW!!! Your truck looks great. Love that blue. Chris:)
The trucks up to 1953 had mounts that bolted to the side of the bellhousing. 54 and up had the two bolts that bolted from under the...
Repro 54 grills?? I've seen one of the new repop 54 grills and was surprised at how many blemishes there were on it. Maybe it was just that one....
Headliner Blues!! Always dread putting headliners in. The way that I put headliners in is I open the pinch slot in the metal bow and center and...
Old stock rebuild kits used to be available, I think Obsolete chevrolet had them. If I was spending your money I'd go electric;) Chris
Hey Mike I just measured the bumpers. The rear is about 6 feet long and the front is about 6'6" measured over the face of the bumpers. Hope this...
Welcome!! Hi Mike, The original rear bumper is flatter in the middle. Chris...
I bought a quart of paint from jim carter about ten years ago for my 54. The can says 1951-60 chevy blue (PN:PT116). The paint is alot better in...
Separate names with a comma.
