Toni I'm interested in those links and if you would post them I would appreciate it. Thanks.....Big Tim :cool:
I hear ya but then again my dad is 70.....
Thanks guys and it should get good mileage with the progressive linkage as long as he keeps his foot out of it....Big Tim :cool:
I had to take a little time out and do a project for my dad, I think he will be thrilled that I could turn This box of junk in to a work of...
Don't cut anymore than 1 and 1/2 coils off the front and on the rear you can put jack stands under the rear frame leaving the desired gap between...
put a spring on it
:eek: STAY AWAY FROM THE LIGHT NATE!....Big Tim :cool:
I've been a welder for 30 years and have 13 certs. I've done several patch panels on various vehicles and the welder I have used at home for the...
I know Brit, I have less than that in my 61 and it's a lot faster than my 54....Big Tim :cool:[ATTACH] [ATTACH]
Here's a set of custom made roller rockers for a 302 Jimmy I seen at the Turlock Ca. swap meet this weekend. you can have these for a mear...
Do this, Jim Meyar front end with tubular A arms Avo coil over shocks Mustang rack and a sway bar and four link suspension in the rear,...
Yes it's true.
Good eye Bill and you're right, that's not a 261. It's probably a 248 or possibly a 270. If a person were to look down where the #'s are stamped...
I welded a coupler nut to the inside of the upper half then used a piece of all thread and screwed it down in to the carb. Then just spin the...
I made these air cleaners out of the origonal hubcaps on my "61"...Big Tim :cool: [ATTACH]
All that sounds great and is probably a good idea for most but it's just not enough fun for me....:D
Thanks Brit, see that didn't hurt tooooooo bad, did it? probably didn't leave a nasty taste in your mouth either. lol....BIG TIM :D
Nice web site. Did somebody say impressive gains could be made by massaging the head?[ATTACH] [ATTACH] .120 shaved off the head .008 off the...
bump steer Bump steer is usually caused by a caster problem. You can change the caster by shimming the front of the axel. This should help with...
This maybe a little extream but this is what I did on my 54....Big Tim :cool:[ATTACH]
Separate names with a comma.
