Russ, Could I spray another coat of Clearcoat over panels I have rubbed and polished? I used the 3M Rubbing compound and a Turtle Wax...
Thanks Russ, Initial tests look pretty good. I sanded one door with 2000 grit, then rubbed it out with 3M, then a polishing compound. It's...
How to polish? Russ, I have everything sanded down so that it creates a vacuum between the panel and paper when wet sanding. This was done...
I have been struggling for several days now with my clearcoat. I shot the best coat of base color I have ever done on the cab, doors and hood....
Pictures, Pictures... I hesitate to post this because I do not consider myself one of the wise sages of this forum. I do think I am right on...
Driver side hole The driver side hole is for a clip to hold the wiring harness as it travels to the rear. A clutch-head bolt (head up) secures...
What is all this talk about Patrick's Rear End bouncing in a Speedo? Am I on the wrong website?
Warning!!! This is another rant about the lack of an assembly order document. I have installed and un-installed the gear shift rod [the one on...
I have to stop looking at this thread. I am not even finished with my first project truck and I have already thought about a '51 Burb as my next...
Thanks Russ.
Russ, I am at an impasse on painting my truck ('51 - 1/2 ton). When I started, I thought I would put two coats of the base color on all body...
Ken is right. The NAPA part number is 1100 and the cost is $12.39. This is the one that fits my canister. Take the top off yours and...
Thanks Nate. Time to hack up my fingers with an Xacto knife. Greg
The power of the Forum This shows the power of this forum. Thanks to Jim (Thunder54), I now have the bracket I was searching for. It is...
I recently purchased the rubber floormat from our host (CP). I don't know if I have a defective one or if I ordered the wrong one. Since there...
Volker, Go to this website, enter the dates you will be here and then the states to which you are going. http://www.hemmings.com/calendar/...
Thunder54 Jim, Let me know if you did not receive my personal message about the bracket. Greg
Jim, Yes, that is what I need. I have never sent a PM, but I will try. Greg
Nate, I just scanned the page into Photoshop and then used the paintbrush to color the part of interest. I also cropped out the part of the...
Ken, I am not in a big hurry. If you find one, just let me know. Greg
Separate names with a comma.
