I am wondering if my old short water pump will work on a Gen II SBC? I was told that they were not because of reverse flow. I though reverse flow...
Hopefully this will work 283 Man. This is an old pic but all my other pics are too big. Brian
Exxon already owns both arms and one leg. Prett soon I won't be able to drive at all. It's all good though everyone in the Exxon corptate office...
I have no idea on my gas mileage. But I do know the tach dosen't sit a 3300 RPM on the highway anymore.
Edlebrock 600cfm Performer. You might need an adaptor plate though. Brian
Mothers is the best I've used. Also try the Mothers power ball. It looks like a lot less elbow grease. Brian
It would probably be 5000lbs with 300lbs tounge weight. But if you are going to use this as a towing rig do not use lowering springs and I would...
283 Man Hey 283 Man I'll try to get some pic's on my baby. But for now it's a 66 LWB fleet with gold and white top. I am running a 283 with a...
Take a look a Mad Dog Transmissions. They are on the web. I bought mine from there. I bolted it up added fluid and it works like a champ. I think...
If you plan on any highway driving consider a 700R4. It's worth every penny and the rebuilt ones are alot stronger than the old one's. Brian
The harness uses standard male/female connectors. If you plan on changing out the main harness under the dash in the future you can just make a...
Just use a little blue lock-tite. If you are still concerned you can drill a small hole through the bolt and put a cotter key through it.
I found my C10 LWB in north Texas 5 years ago. It' s actually more reliable than my new truck. Last summer I hauled the old girl up the ALCAN...
Use graphite any where you need lubercation but don't want to attract dirt. Usually you can find liquid graphite at the hardware store in the lock...
I use a Edlebrock Performer intake with a Performer 600cfm carb. Runs like a raped ape.
I did mine when I changed to a 700R4. I also changed the carrier bearing and had the whole drive shaft balanced. What a huge diffrence. Good luck...
Take off the valve covers. It will give you a good idea what the rest of the motor looks like. Use a compression tester to see if there are no...
It sounds like big trouble. If it is rusted through in that place then it is probably thin in other places. Look for another frame. If you want to...
For your electrical problem check the harness where it plugs in at the fire wall. You have to much stuff out to be fuses, but you never know....
Try jacking up the rear of the truck. Spin the drive shaft and count how many times around it goes until the tire makes one rotation. Also if you...
Separate names with a comma.
