If you have trailering arms try looking here. http://www.earlyclassic.com/catalog.aspx
Just got back to the States a couple weeks ago. It felt so good to fire up "The Nugget" and cruse around town. I've been spending every moment...
I ran into the same problem when I did my truck. I beat the dog snot out of this pickle fork and it just would not give. After a couple hours of...
Evan you're the man. Not too many people these days would do that for some one. Tell your "Man you can trust" to keep the frame. Get another frame...
I'm not sure that you can. If you add a 60 ohm resistor then the sending unit will always have at least 60 oms of resistance so it would have a...
I haven't done the cab mounts but I have done the door sills. The process should be similar. Use a drill bit to drill out the spot welds and it...
Any chance that you will be adding a complete bed side for the 66 C10? I have seen a compeditor getting ready to sell them. Pete;)
More than likely you have a 4.10 rear end. Pete
Try a 1/2" rachet drive with an extension and the correct socket. the extension will get the rachet handle up where the spring coils are spaced...
Try 73-86 C20.
Here is a speedo calculator. As soon as I get back for Korea I'll be installing my new 700R4. Good Luck Pete...
They are probally the same ones as the ones in the c10.
I also am looking into putting in a 700R4 into my 66. On the linkage Lokar sells a TV cable. The TV cable is used for that tranny. Also with that...
Give me your email and I can send you a wiring diagram.
First use PB for a week on the bolts. Put the rear of the truck on stands. Put a jack under the pumpkin and bring the rear up just a little....
RE: Vroom. putt.putt.putt. VRoOm, p Mojor tune up then check timing and make sure your distributor is advancing when you give it gas. Brian
After I had replaced all of my wheel cylinders it took me a good 3 quarts of flushing until it was clear. I bled the rear passenger side first...
Try spraying it with PBR, it's alot better than WD40. And if all those other tricks fail use a drum puller. You should be able to rent one from...
Don't do anything you'll regret.
I am currently stationed in Korea and am seporated from my '66. I just happened to check out your web site and saw you are finally carring a brand...
Separate names with a comma.
