Also if that dosen't work take a short drive to Miller's off of Broadway. The guy over there is pretty friendly and has some sweet rides to check out.
I'd just replace the button. Also with all that pulling and prying you might want to check the catch and make sure it is not bent down too far....
I had a similar problem with my '66. Every time I took off or stopped I heard a clanking noise for the front end. Kind of like something was...
Check the post it might be installed in the wrong position. Sounds like it is 90 degrees out of wack. Pete
After you changed out your radiator and water pump and added new coolant did you let it get hot enough for the thermostat to open? If you didn't...
A couple of years ago I had a similar problem. When I took the alternator out and had it tested it would be good. But every morning I would have a...
I did do rockers on a 71 C10. The method for yours is similar though. I did this when I was being taught how to weld. When you get ready to do...
68 - 72 1/2 ton trucks will work. I also think that 1/2 tons up to the early 80's will work. Make sure you get a praportioning valve with the...
Their was an option for that type of helper leaf spring to be used in counjunction with the coil springs. If that is what you got then it is...
RE: Disc brake/power steering conve Get a powersteering box and pump from a late 60's thru early 80's C10. I think Chevy Duty sells a bracket to...
Jim ##### Trucks makes a bolt-in kit for power brakes. Works with f and r drum set up. Brian
RE: alternator not in line iwith wa You need to put spacers on the bracket it self. That will line it up. I used a few washers and I was able to...
Also put some penitrant like PB or WD40 on it and let it sit for a while. Also before drill out the screw heads try using a impact driver to...
Try replacing the pitman arm idler arm inner/outer tie rods on both sides and that should fix it. If it still drives sloppy change upper and lower...
RE: Classic style rims for my '66 s American Racing makes a set of 1960's style chrome ralleys. I think I paid about $80.00 each. Then I got a...
If the motor is kicking on and off with the switch in the off position it isn't the motor that is doing it. You might have a short somewhere. If...
[updated:LAST EDITED ON Feb-26-04 AT 12:37 PM (CST)]If your are trying to make it as original as possible go with the 283 but if not go with...
I don't know exactly what the kit is called but I know you can find it in the GM Performance cataloge.
I have a large back window and a passenger side window for sale. It's off of a 66 C10. There is nothing wrong with either piece. First $15.00 plus...
Separate names with a comma.
