Jeeze !! It's that darn brat from next door !!! ;) As best as I can, the e-brake brace, ( aka crossmember ), that is rivited to the frame...
Thanks Kieth !! Did you post this over in "That Other Forum" ? Val
" Your other option is to just by a kit from CPP." OR,, Early Classic Ent. http://www.earlyclassic.com Chevy/GMC 60/40 split bench seats...
" Was wondering the "easiest" route to get there-" Sell the one you have and BUY a 4X4 !!! ;) ( no kidding !! ) Val
Stay Safe everyone ! See you on the flip side ! Val
Shane, First thing to check is the bulbs. These are duel filiment bulbs and it's not uncommon for the filiment that works the BRAKE lights to...
Stance Photos.. http://www.earlyclassic.com/Tech.aspx?category=Stance+Photos Val
You can get drop springs without converting to disk brakes. But I would NOT go 3 inches, even if you could find them, for the front. TWO inches...
Merry Christmas to you too Pard !
I think they run ablot $90 or so,, check out Summit http://www.summitracing.com Well, I thought it looked goofy. So I used a Lokar brake...
Merry Christmas, Happy Chanuka, etc, etc.... Get out from under your trucks and spend some time with family and friends. You may need someone...
" Black wire from Distributor - Goes to the Negative post on the coil. The " resistor looking thing on the coil braket with a black wire coming...
This is difficult to explain without a wiring diagram in front of you. ( I recommend you get a set for your truck. You will need them again,,...
Just a guess,,, about $75 - $80 bucks...
I used a Lokar Eliminator Go Pedal. [IMG] THIS one should work too. I just wanted to keep the firewall as clean as I could. [IMG]
You can try and get it running without the radiator in place. Coolant will be needed after the motor reaches it's operating temp and the...
I didn't need to bash in on the header pipe, although I could have. [IMG] This was the problem. I cut away on the tower, then welded in...
The headers in the pic above are hot coated 67-72 Chevelle 3/4 headers from Patriot. I had to use them because I moved the motor forward 2 1/2...
This is what it looks like in the truck. [IMG] If you don't like the valve covers with the bow tie, there are plenty of choices of...
Separate names with a comma.
