What 54 Jimmy are you talkin about, I wanna see :D....Big Tim
Check with Brian, he has the 60-66 truck parts listed on this forum, Im sure he can help you....Big Tim :cool:
Thanks Wolf, keep pluggin away you'll get there....Big Tim :cool:
only if we're talkin 270's or 302's, it's all about cubic inch with me..:D....Big Tim :cool:
Did you bench bleed the MC first before you installed it? I'm not sure what you have done and I don't want to insult you but let's start at the...
Hey Leyland I run a 235/75/15 on stock 15x8 5 lug truck ralleys on mine also. I have thought about changing them but they just seem to look right....
Hey Nate I was just messing with ya, well cause I can... You're right though, my engine has been modified to handle the 2 holly 350's and I...
Avoid plopping on a modern two barrel carby (usually Holly) because it cannot properly meter the fuel and so creates running problems whilst...
Make sure the bleeder valves are at the top of your calipers or you will get air pockets trapped in side. If they are at the bottom then you...
The fuel pump should pick up, you might have a plugged fuel line and what you should do is disconnect the fuel line from the pump and blow back in...
You're better off with the 350 cause the "6" sounds like too much trouble..lol How bout doing this instead :D......[ATTACH] [ATTACH] .....Big...
Good job dad......:) Big Tim :cool:
Do This.....261 Chevy [ATTACH] [ATTACH] Big Tim :cool:
The shackles are supposed to move to allow the springs to flex, as the springs flex they get longer from spring eye to spring eye. If the yoke on...
Here's a pix of a Rod Doors panel installed on my "54". It's not upholstered yet though....Big Tim :cool: [ATTACH]
I Went to the Graffiti Car Bash in Modesto Ca. this weekend, over 700 cars and trucks. Here's something I thought you guys might like to...
Your 12V power source to the brake light switch should come directly from the fuse panel. Use a test light and go to the fuse panel with the...
It's called a pinion seal.
You can check your fuel pressure with a vacuum /pressure gauge. Just disconnect the fuel line and connect the pressure end to the gauge and start...
Your tire size can also throw your speedo off. You might have the correct gear combo with a different set of tires. Seems to me there was a book...
Separate names with a comma.
