The valves are probably hydraulic. What you can do is roll the engine over until the#1 exhaust is open all the way then adjust the intake valve to...
Looks good nice job!! But are you sure that angle for the upper shock mounts is heavy enough? It looks a little light....Big Tim :cool:
Make sure your battery is charged and your connections are good clean and tight. A new starter doesn't always mean it's a good one..... Big Tim :cool:
Are you going to fabricate a tunnel to mount it on? It looks like it will be right on the floor if you don't. Here's some Pix of what I...
American Steel Verses Japanese Doo Doo So I cruised down the hill this weekend to take care of some business and change gears in my "61" first I...
So I cruised down the hill this weekend to take care of some business and change gears in my "61" first I had to take care of a ticket and that's...
I believe if you use the 1/2 ton dropped front axle with the 1/2 ton truck spindles that the 54 car 5 lug hubs and drums will fit with no...
If you can fit and weld you can get a brand new door skin off of e bay for around 150.00 bucks....Big Tim :cool:
Boys boys boys, I think you;re both wrong , How bout a tunnel ram and stainless fender well headers made by Big Tim. [ATTACH] Could this be the...
I've done a little bit of cast iron welding and had good luck, What I do is clean the piece that I'm going to weld first, then groove out any...
That's a common problem in trucks that are used for towing boats. When you back a boat in to the water and that hot axle go's in to that cool...
Do you have a return spring on your clutch pedal? If not that's probably what wore out your throw out bearing.
What I always do is drop the distributor in the hole if it don't line up with the oil pump just turn the engine over by hand until it drops down...
I think the small copper tube you are talking about is a top end oiler, it gives extra oil to the rocker arms.... Big Tim :cool:
When buying a oil pump just remember to tell your supplier what year engine you have, you can go through Clifford performance and get a high...
The oil canister lid should come off after the bolt is removed I 'm not sure if there's a o ring in there or not but it should come off. You might...
That's right, You don't need to use the timing mark to adjust the valves....Big Tim :D
when you adjust the valves, adjust the intake with the exhaust all the way open and adjust the exhaust with the intake all the way open. Then go...
On your alternator you have a "R" ,"F", "ground" and "battery" wire. The "R"wire go's to the #2 terminal on the regulator, the "F" wire go's to...
Why split the pipe if you're gonna wait till you get to the back of the truck? 325.00 seems like a lot of $$$$ if you are only running a single...
Separate names with a comma.
