The steel ball is the right timing mark, and make sure you have ported vacuum to your vacuum advance, when you open the throttle the distributor...
I used to run Hemi mufflers with Clifford headers. They were fairly long mufflers and were kind of heavy 2 1/4" in and out and they had that low...
ATTA BOY!!.....Big Tim :cool:
Looks a little wide in the front, I like the pre 73 Camaro sub frame myself.......Big Tim:cool:
If one's good then two's better :D:D:D[ATTACH] :eek:
What Nate said.......except you can use Trannys from late model cars and trucks all the way up in to the late 80's as well, like the fully syncro...
Steve, turn your ignition switch to the on position then take your test light and see if the wire to the HEI battery side lights up. Now keep in...
How was your engine running before you started the conversion? I'm just wondering if you have a plugged exhaust system. If you put a vacuum gauge...
If you look at your stock wiring harness you will notice that the wire going to the battery or starter sylinoid (doesn't matter) weather it was a...
2 words," EARL SCHEIB " He'll paint any car for 99.95 :eek: :eek: lol
I'm questoning the 18 Ga. wire myself. I read an artical on line that said use 14 Ga. wire and I think that's too light too. Every wiring harness...
There are all kinds of after market over flow tanks you can get. Or you could pull one off of a later model truck or car would work just...
No problem Steve , good luck with all that .....Big Tim :cool:
I believe the ammeter go's in line between the charge terminal on the alternator and the battery. Look in a Chiltons manual or Google how to wire...
you did the right thing Cody. you could also try a performer manifold. you might like the looks and the way it runs better than with that old...
With the HEI ignition you should be able to run the plug gap at .045. The miss sounds like the timing could be too far advanced, I think you are...
I have a 61 1/2 ton stepside and my steering box mounts on the outside of the frame rail, I also had a 65 stepside and the steering box mounted on...
Look's good, I did the same thing on mine only I used a aluminum after market cross flow and cap the hood latch panel to make it look more...
I would say that the "R" terminal go's to the ground side of the relay so that when the engine get's up to temp. it completes the ground and...
You might want to check your fan blade and make sure it's not on backwards. You want it to pull air through the radiator not push.....Big Tim :cool:
Separate names with a comma.
