I went with electric sending units. I like to keep scalding hot fluids OUT of the cab ! ;) I also used them because I planned on using a new...
Congratulations on the marriage ! Nothing says LOVE better than a primered truck ! ;) Val
Yes they will work. Save the old temp sender and use that one. The oil sender ( or tube ) will go right where the old 283 had it's opening, right...
I had a 305 with a 2 barrel carb hooked to a granny 4 speed with 3 : 70 rear in my 64 C10 panel. Best mileage was around 9 mpg. Swapped to a...
In a word ? YES ! You will need to add the proper yoke and have the front shaft shortened. Val
In a word ? NO. The later model wheels, while sharing the same 6 X 5 1/2 bolt pattern, are "Hub Centeric". All that means is that the wheel...
"...seems almost cheaper to buy a beater camaro, etc. for a doner and if lucky use it's rear end, steering, etc. " That is sound logic,...
Smart move !! ;)
2 inch lowering springs. About $100 a pair from most suppliers. There are lots of reasons not to cut springs, and even more about not...
http://www.cruisinforacure.com/
I like the KYB's in my dropped panel !! Val
Any good trans shop should be able to hook you up. The gear will depend on tire size and rear end ratio as well as the trans used. Val
Clutch ??? Val
"Theres Whole Lot Of Fabrication That Will Have To Be Done To Make The Mustang Parts Work On The Gmc Pickup Frame." Amen to that !! Sell off...
" should I cut out the centers to fit and use the modern factory chevy rims or is there another rim that will fit??" If you want to use the...
Sorry for the delay... Been in Maui for 10 days tannin my buns ! I moved the engine forward to make acess to the HEI distributor less of a...
Scott I don't have any of the completed system. This is the set of Chevelle cermanic headers I used. I moved the motor forward 2 1/2 inches...
I used a set of 3/4 headers and had my exhaust guy attach the collectors to a dump tube that was capped just behind the front wheels. A Y...
" that hole is for a thing called a Z-BAR that is for standard transmissions to hook to. " The Z-Bar is for the clutch pedal hook up. One side...
Leyland, Purchase the 1963 Factory Service Manual, and the 1965 Suppliment. The manuals are the most valuable tool in the garage when working...
Separate names with a comma.
