It bolts to one of the M/C mounting bolts.
Check my wiring thread.....
I had this problem when I first got mine, the carb would clog up with fine brown silt to the point of crapping out on the side of the road. I got...
The front lines are 3/16 line from the prop. valve, the rear uses a large adapter to reduce to whatever line you are using, Master Power...
I'm in the middle of documenting this install onthe 50 in the garage. Master Power has the prop. valve, it is based off an s10 design I was told....
There is not mch airflow out of the engine bay. My 350 is bored .080 over, it gets hot. In the shop, we have cured heating issues with aluminum...
Now slip the outer column over the shaft. Put the lower bearing over the shaft and I tack it in. I find that lawn equipment suppliers are the...
Now for the steering column. I posted a how to a few years ago, https://talk.classicparts.com/showthread.php?t=7908, but here it is again......
O.K, now mark crossmember center line, put crossmember on a jack and jack into position, make visual adjustments, then get the tape measure....
Now you need a suburban.....I can't fit the wife and both kids in my truck....
Yes, think of them as a check valve, they keep a specific pressure in the lines so you don't have flowback.
Make a plan and try to stick to it. Gather the major parts before you start, sheetmetal, drivetrain, wiring harness, wheels, etc. With the big...
Send her on over, I'll take care of it for you...
Are the rear axles pivoting? Looks pretty cool. A friend makes lowrider/rat wagons from castoffs, then sells them faster than he can make them at...
The preset prop valve is fine for most applications, mount right near the master. The adjustable is for those who like to fine tune or "fiddle"...
I can't weigh in on that arguement, but the pros all use and reccommend them.......
The residual valve is needed because our master under the floor can put it under the level of the calipers. The residual valves keep mium...
Preset prop. valve... http://www.mpbrakes.com/products/product-detail.cfm?product_id=614 adjustable prop. valve......
I have done the frame that way also, but this one I have done to the Fatman sheet instructions, also the way they build theirs. That is a great...
Check that the cab mount is not rusted. They wil collapse from rust, or they rust out where they meet the sill, putting the weight on the floor...
Separate names with a comma.
