Arrow generally notes flow, arrow should flow toward the caliper.
You could use a prop. valve for a disc/drum factory setup from NAPA, or most hotrod supp;iers have the brass block with the pressure brake switch...
I have not done their rear, but if a paying customer brings me one, I'll post it!
Bringing this back up to the top for the new guys.
Rough cut the cardboard templates, then whittle them down untill they fit like you need them to. [IMG] Trace the pattern on the steel....
Sorry, chalk that one up to cerebral flatullence.
I have installed 4 Fatman front ends. Brent is a friend of mine, a nice guy who knows his stuff. They are right here in town, I stop by often.
Grab the handy dandy sawzall and cut off the steering column a few inches from the firewall. I will be shortening the column anyway, so where the...
Farm tech vaccuume canister.
You can also mount that shock bar above the frame, there is some space between the bottom of the bed and the frame. I have seen factory shocks...
tHATS WHAT i DID.
That is Campy, our 2nd Dalmatian. Training up to be a shop dog, still likes to steal whatever she finds on the floor.
VERY solid mount. At least it was bolted in, not welded.
Our victim: 1950 with 51 doors. Had a rough life, we are fixing a lot of farm tech as we go.... [IMG] Lay out all parts and do an inventory,...
Yes, and much swearing is usually involved. Check the build thread.
Go to NAPA and pick up the sockets and 1154 bulbs, just tack or bolt the sockets to the housings and away you go.
Complete or parts? How far along do you want?
I will be beginning to install a Fatman coilover front end this week in a 50, along with new brake lines and a new master. I will try to cover it...
That stuff may not stick on the roof or vertical panels for very long, Heat set all of it. Anything that cuts down the resonance of a panel will...
Take the element with you to the store, open boxes and find one that fits.
Separate names with a comma.
