Google The Truck and car shop Click on to the 47-54 catalog Pg 17 part # 52-02009 and 52-02010 52-54 left and right latches 35.00 each. They...
I've had really good luck with a mid 70's GM 3/4 ton truck master. They have a bigger bore in them but the overall size is about the same. I've...
Google The Truck and Car Shop or Jim Carter Truck Parts They will have everything you need.
Without being able to actually touch it with my tape measure I can't tell a whole lot but it looks like the builder just bolted it right up except...
N new O old S stock And you have to just look around. E bay is a good place to start.
I'm only guessing that you are looking for these parts for the truck you have shown in your post. If so you can go to Jim Carter Truck Parts on...
Google Truck and car shop. Then click on 47-59 truck parts Pg. 71 part #47-09613 cost is .50 cents
It sounds like just a simple lack of fuel problem. Take some Carb Cleen and try spraying some down the Carb when it starts to die and see if that...
I think the article showed that they had cut and narrowed the cross member and steering link, so why wouldn't it work?
After looking at your original pix it looks like you already have a fan on the engine so all you really need is some kind of fan shroud to help...
Sounds like you have the fan pushing air through the radiator. They are more efficient if they are pulling air through the radiator. Soooo if you...
I would relocate the cooler you have to the inside of a trash can :eek: and go with a smaller cooler on the front side of the radiator. For 1 the...
I ran in to that problem on my 261, with 9.5-1 pistons .120 off the head and .08 off the block it didn't take long to blow out the stock head...
The 848 is a better head because it has a smaller combustion chamber which creates a higher compression ratio. They are usually found on the 235....
No polyurethane either, all aircraft rod ends on the four link and on the upper and lower a arms. :)
Here's what you need to do, bring it to me on a trailer with a blank check then come back in 6 months and drive it home.....Big Tim:cool:[ATTACH]
Hamrs, yeah I'm pretty sure I know him. Doesn't he have a Falcon pickup and a old rat rod he's building?
Hey big Tim can we get a good look at that motor in your profile pic is that what I think it is ?...
Thanks for the compliment and you're absolutely right about the panhard bar, but the stiff ride comes from the American coilovers and the fact...
Are you planning on making a hod rod out of your truck? If so a 4 link is good, the ride is stiff and there is less sway. If you change the...
Separate names with a comma.
