The AC unit is Ac only. It was dealer installed between 60 and 63. You're right it is huge but I thought it would be a nice retro look . Besides...
Yes I covered the steel panel with vinyl and the s.s. strip and pocket both came from a mid 70's Chevy truck. I used 1/8" masonite for the lower...
Check out my new door panel. I think it go's well with the inside of my 61. It was cheep and easy to do.
I would just use a in line filter and leave the guts out of that one.
Try e bay 60 Chevy trucks... They have all kinds of parts for those years. I've had really good luck with that.
Check and see if you have a vented cap, if not I think you need one. If the cap is vented then you need to see if it's working properly If you...
It takes 25 "ATTA BOYS" to make up for 1 "AWWW SHIT!!!" Here's your first. I knew you would get it. :)
You would probably be best off using a universal set that you can cut to length and crimp the ends on yourself. I've never had a taylor made set...
The most you will have to do is roll the engine over a little to make sure you are on the low side of the cam. You can also use a big block Chevy...
Wow that's a tough one. If you still have the old parts I would start comparing the old parts with the new ones. Maybe even put the old parts back...
I have the same wheels on my 61, 5 lug mid 70's ralleys. I've looked at both styles and there is no way that I know of that this can be done . The...
You know something else just came to mind, your gas tank might not be properly ventilated and be creating a vacuum. Just for the heck of it take...
One last thing that comes to mind is if your gas tank is not vented properly it will create a vacuum and make it starve for fuel. Just for the...
Ignition problems can fool you. A bad ballast resister or condenser could cause you the problems you have described or even a coil. The ballast...
Are you sure you don't have a vacuum leak like around the intake or possibly the hose that the pcv valve is on? Start it up and spray Carb. cleen...
Yeah eventually it will be all yellow. It's one of those life long projects ,about 31 years now. The paint that's on it now is about 25 years old....
You might try the Truck shop in Orange Ca or Jim carter truck parts. you can find both of these places on line. I hope this helps.
Nice job Jesse, I'm not too crazy about them old 3 speeds though, I went through about a half a dozen of them before I finally converted to late...
Separate names with a comma.
