The screw size could be a 10-32 or 10-24 or a 8-32 or 8-24 I'm not sure but you could order a variety of sizes and they would benefit you...
I've got an extra 235 in storage . It has 5000 mi. on the block forged pistons, balanced, performance Crower cam, shot peaned rods with Arp rod...
I would just go with the mid 70's 1/2 ton Chevy although I think they are a couple inches longer but I don't think it's something that can't be...
I love when people ask this question because I found a cheep and easy answer that I am happy to pass on to others. Read what I did and have...
This is dealer installed Cool Pack air conditioning. I was very lucky to find this. This thing blows a lot of air.
If you go with a mid 70's Camaro sub frame you will solve a lot of problems and be much happier. Just a thought.
Instead of doing the board trick, why don't you use a degree finder and see where the original rearend is at then set the new one up the same way.
All I can say is try the advise I gave you before.
yes you can. just make sure that your stands are under the rear leaf springs .
Try pulling the top of the carb off and check the float level. then check the needle seat and make sure there is no trash in the hole. You might...
The only advise I can give you from experience is to work off of centers, set your rearend on the spring perches and make sure you have a 1 1/2...
It could be that the engine is not properly warmed up. Let it warm up to temp. then release the choke. If it continues to pop and backfire you...
Try the truck shop or jim carter truck parts. You can google either one of those and get a web site.Good luck!
I'm not sure how to post pix of my 61 on here,but if you go to the photo gallery on this site they are listed under 60-66 bigtimjamestowns 61
Try using a power steering pump and brackets from a 67-72 Chevy PU. w/short water pump. You will also need the duel shiv lower crank pulleys. You...
Why don't you go with disk brakes? you can do this cheep if you do what I did. I bought a complete 77 1/2 ton chevy for 400.00. The front spindles...
You can't. I went through this myself, The cab is different for a automatic than a 4 Spd. The fire wall is designed a little different for the...
Dealer installed Cool Pak AC. for 60-63 Chevy PU.
All fabrication and modifications were done by Big Tim of Jamestown Ca. No kits of any kind were used. This truck was built with the help of a 77...
Separate names with a comma.
