As it is predominantly flat, home patches wouldn't be hard to make with basic tools. However, the rust you see is only the rust that has broken...
I covered mine in horse blanket a few years ago. I used 3M super 99 spray adhesive. Remove windsheild moldings and rear headliner strip, tape...
I had 4 wheel disc and ran a 67-76 Corvette manual master. Worked pretty well. Used a Master power adapter mount. I ordered a bolt in (It...
I have used both. I have rebuilt my original guages in my truck, replaced the temp and oil and refaced the others. I have a repro speedo after...
I put on a booster, didn't make much difference. Stick with the manual.
I have never come across shims, but that doesn't mean they never had them...... or that they couldn't have been added.
You can subscribe to the tech. thread list, then consult as neccessary, or sticky the thread to the top.
They are taken out of the how to assemble thread, but this way you can search different jobs without having to scroll. Your welcome guys.
Put them the way they were.
Take step by step pictures and we'll post up a tech article on them.
How to change out the origional ignition lock cylinder..... After I figured it out, I realized that you don't have to remove the ignition switch....
Pertronix install. Really couldn't be simpler. Remove dist. cap..... [ATTACH] Remove condensor and points, pass through wire block... [ATTACH]...
Cab to running board seals.... consist of a retainer and rubber seals. [ATTACH] Spread a little weatherstripping adhesive on both parts and...
Some people are a little freaked out that they go out, too used to modern stuff I guess. No the headlights won't come on.
Yes, if you are stripping the whole guage down definately paint it, makes it much brighter.
Quick tip: to make front marker lights stay on with the headlights, run this jumper between tail lights and front marker lights...The black wire...
Step one, lay on your back and reach under dash to remove the 4- 3/8" nuts from the 4 corners of the guage.....be shure to disconnect the battery,...
How to install inside windsheild trim.... https://talk.classicparts.com/threads/how-to-install-inside-windsheild-trim.18028/ How to install door...
Now for the windlace. Not fun. 2 would be helpful on this also. The book says to slide through the center over the door first, but that wasn't...
Headliner.....the dreaded task. 2 people are really needed, though I did it by myself and took pictures. Start by loosening all the screws in the...
Separate names with a comma.
